- Land
- Australien
- Hersteller / Marke
- Airzone (1931) Ltd.; Sydney
- Jahr
- 1959
- Kategorie
- Fernseh-Empfänger/Monitor
- Radiomuseum.org ID
- 296140
- Anzahl Röhren
- 17
- Röhren
- 6BQ7A 6CQ8 6CB6 6U8 6CB6 12BY7 6AU6 6AL5 6BV7 6SN7GTA 6AQ5 6SN7GTA 6DQ6A 6AX4GT 1B3GT 5AS4 21CBP4A
- Anzahl Transistoren
- Halbleiter
- GEX34
- Hauptprinzip
- Super mit HF-Vorstufe; ZF/IF 36000/30500 kHz; 1 NF-Stufe(n)
- Wellenbereiche
- VHF/UHF (siehe Bemerkungen)
- Betriebsart / Volt
- Wechselstromspeisung / 200; 230; 240 Volt
- Lautsprecher
- Dynamischer LS, keine Erregerspule (permanentdynamisch) / Ø 5 inch = 12.7 cm
- Belastbarkeit / Leistung
- 3 W (sinus/unverzerrt)
- Material
- Gerät mit Holzgehäuse
- von Radiomuseum.org
- Modell: A216 - Airzone 1931 Ltd.; Sydney
- Form
- Tischmodell, Zusatz nicht bekannt - allgemein.
- Abmessungen (BHT)
- 24 x 24 x 22 inch / 610 x 610 x 559 mm
- Bemerkung
-
21 inch B&W television receiver tunes the ten then standard Australian VHF channels.
Rebadged version of AWA Model 225.Cabinet finishes available in Walnut, Maple & Mahogany.
See also Westinghouse model W216.
- Originalpreis
- 173.25 AUS £
- Literatur/Schema (1)
- J.R. Publications Television Service Handbook (L.J. Series Vol. 1, 1962 & 1967, Page A85.)
- Autor
- Modellseite von Martin Kent angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 283 Modelle, davon 131 mit Bildern und 154 mit Schaltbildern.
Alle gelisteten Radios usw. von Airzone (1931) Ltd.; Sydney
Forumsbeiträge zum Modell: Airzone 1931 Ltd.;: A216
Threads: 1 | Posts: 5
I have an Airzone TV that the circuit matches perfectly with the AWA 225. This model, the Airzone A216T is claimed to be a rebadge of the AWA 225 but has a different valve line-up and two more diodes on the model page here.
I also see no other Airzone TV model listed with a valve and semiconductor line-up that matches the AWA 225 and match the Airzone badged TV in my possession.
Either the A216 is NOT a rebadge of the AWA 225 or the valve and semiconductor listing for this model is incorrect. I have not found any other AWA model that matches this valve and semiconductor line-up.
Perhaps the model page creator or another contributor could check the source of information for these rebadged AWA models and clear up this inconsistency.
John Pratt, 22.Dec.23