• Año
  • 1972 ?
  • Categoría
  • Receptor para radioaficionados (puede incluir bandas de radiodifusión publ.)
  • Radiomuseum.org ID
  • 330126

 Especificaciones técnicas

  • Numero de transistores
  • 26
  • Semiconductores
  • Principio principal
  • Superheterodino doble o triple conversión; ZF/IF 100/455 kHz
  • Gama de ondas
  • Bandas de recepción puestas en notas.
  • Tensión de funcionamiento
  • Red / Baterías o pilas / 12 or 117 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 1 W (unknown quality)
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Shortwave Receiver SX-190 - Allied Radio Corp. Knight,
  • Forma
  • Sobremesa de cualquier forma, detalles no conocidos.
  • Ancho, altura, profundidad
  • 15 x 7 x 10 inch / 381 x 178 x 254 mm
  • Anotaciones
  • The SX-190 and its AX-190 ham counterpart were offered from late 1971 to 1973. These were highly rated when introduced, considered the best-ever Allied receivers. They are still considered excellent analog-tuned receivers. Frequency read-out is quite good. A dial reading of zero to 500 is the value in kilohertz to be added to each band-switched frequency setting. The crystals for each band are at first IF plus the base frequency of interest.  Both the SX-190 and the AX-190 cover the 80, 40, and 20 meter ham bands, 11 meter CB, and WWV at 15 MHz in the 19 meter band. The SX-190 also covers the 49, 31, 25 and 16 meter shortwave bands while the AX-190 covers the 15 meter ham band and four segments of the 10 meter ham band.  This receiver is nearly identical to the Realistic SX-190 and similar to the  Realistic DX-190. Contains 4 FETS, 22 transistors.

    Made in Japan

  • Precio durante el primer año
  • 249.95 USD
  • Autor
  • Modelo creado por Rich Post. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Shortwave Receiver es parte de las colecciones de los siguientes miembros.

 Forum