10 kW Broadcast Transmitter BTM-10K 5J60090
Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- País
- Australia
- Fabricante / Marca
- Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- Año
- 1967
- Categoría
- Transmisor comercial (TX no transceptor)
- Radiomuseum.org ID
- 320321
- Numero de valvulas
- 17
- Válvulas
- 2E26 2E26 4-125A 4-125A 3X3000F1 3X3000F1 6156 6156 0A3 2D21 2D21 5762 5762 6AK5 5763 6U8 6U8
- Numero de transistores
- 3
- Principio principal
- Transmitter
- Gama de ondas
- OM (onda media) solamente
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 3-phase, 380-440 Volt
- Material
- Metálico
- de Radiomuseum.org
- Modelo: 10 kW Broadcast Transmitter BTM-10K 5J60090 - Amalgamated Wireless
- Forma
- Boatanchor (militar, profesional >20 kg).
- Ancho, altura, profundidad
- 82 x 87 x 38 inch / 2083 x 2210 x 965 mm
- Anotaciones
-
The AWA Broadcast Transmitter BTM-10M is a crystal controlled, amplitude modulated broadcast band transmitter with an RF carrier output of 10.6 kW in the frequency range 525 to 1605 kHz with a frequency stability of ±5 Hz.
The BTM series were the last transmitters locally manufactured in Australia by AWA from the late 1950's to the early 1970's.
- Mencionado en
- - - Manufacturers Literature (AWA Handbook 2-60090R)
- Autor
- Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 1433 modelos, 877 con imágenes y 464 con esquemas.
Ir al listado general de Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney