• Jahr
  • 1954 ?
  • Kategorie
  • Strom-Versorgung oder Spannungsstabilisator
  • Radiomuseum.org ID
  • 248998

 Technische Daten

  • Anzahl Transistoren
  • Wellenbereiche
  • - ohne
  • Spezialitäten
  • Netzanode (evtl. auch mit Git+H)
  • Betriebsart / Volt
  • Wechselstromspeisung / 200-240 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Convette LC126 - Amplion, Alfred Graham & Co.
  • Form
  • Chassis - Einbaugerät
  • Abmessungen (BHT)
  • 2.5 x 4 x 2 inch / 64 x 102 x 51 mm
  • Bemerkung
  • Fits in space for a B126 90V HT pack and also replaces the LT pack. LT load must be 125mA or the nominal 1.4V LT will be wrong. Mains should only be connected when the radio is already on. An earlier similar model uses a screw at front to select 125mA or 250mA models. This model is for 1.4V 125mA only. The HT is about 100V at 8mA and probably up to 12mA load. There is no regulation. HT is halfwave C R C smoothing and LT is fullwave (centre tapped winding) and uses 2 x C with a Choke which also acts as DC dropper resistance.

    Three internal Mains voltage taps under cover.

  • Autor
  • Modellseite von Michael Watterson angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Convette befindet sich in den Sammlungen folgender Mitglieder.

 Forum