Australian Monitor 8-Channel Mic/Line Mixer TX8201

The TX8201 has 6 balanced mic or line inputs and 2 stereo auxiliary inputs. Each input channel has individual bass, treble and pan controls.
The first 6 channels also feature a line level direct output which can be used to feed additional amplifiers, mixers or recording devices. An internal dip switch allows the first 6 inputs to be routed to either the direct output, the master outputs or both. The TX8201 also features in-built VOX muting and a 4 tone generator with Alert, Evacuate, Pre-Announce, Bell tones and Remote VCA for the Master Volume.

Specifications

Frequency Response:  50 Hz-l6 kHz (+/ 3dB)
THD: Less than 0.1 % @ 1kHz
S/N Ratio: -74dBV (all  channels at centre position)
Tone Controls
Bass @ 100 Hz-Boost +12dB, Cut -12 dB
Treble @ l0 kHz-Boost  +10 dB, Cut -10 dB

lnputs
6 active balanced mic/line inputs with 3 pin XLR female sockets (200-600 Ω). Maximum input level is 500 mV.
2 Stereo Line inputs with dual female RCA (47 kΩ). Maximum input Level is 1.5 V.
lnput Sensitivity
Mic: 1 mV @ 200 Ω
Line 1 to 6: 150 mV – 1 V @ 47 kΩ
Line 7 to 8: 125 mV @ 47 kΩ

Phantom Power
l5V DC on all mic channels (switchable)

Outputs
Left & Right Master Outputs, 3 pin XLR male sockets, (1.5 V @ 600 Ω). Maximum Output Level +20dB
Stereo Headphone Output, ¼” stereo socket. (3 5 V @ 600 Ω )
Stereo Tape Output, dual female RCA connectors (400 mV @ 10 kΩ ).
Six direct line level outputs (600 mV @ 10 kΩ)

Controls
Level Control per channel
Recessed Treble, Bass & Pan Controls per channel
Left & Right Master Level Controls

Power Source
AC: 240 V- 50 Hz or 110 V-60Hz (special order)

Vous pourrez trouver sous ce lien 4 modèles d'appareils, 4 avec des images et 1 avec des schémas.
Tous les appareils de Australian Monitor (Brand), Amber Technology Ltd.; Sydney