Højohmsmodstand Potentiometer Carbon powder

Bang & Olufsen (B&O); Struer

  • Jahr
  • 1929–1937 ?
  • Kategorie
  • Radio-Bauteil (Einzelteil, keine Baugruppe)
  • Radiomuseum.org ID
  • 274268
    • Marke: B&O

 Technische Daten

  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Keine Stromversorgung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Højohmsmodstand Potentiometer [Carbon powder] - Bang & Olufsen B&O; Struer
  • Form
  • Diverse Formen, unter Bemerkung beschrieben.
  • Abmessungen (BHT)
  • 33 x 33 x 19 mm / 1.3 x 1.3 x 0.7 inch
  • Bemerkung
  • High resistivity potentiometer.

    The variation of resistivity is based on the compression of carbon powder inside the metal box, similar to the functioning of a carbon microphone.

    Variable resistor based on the principle of carbon powder compression. A strong metal case (steel, brass) is filled with carbon powder and a piston is forced against the powder by turning a threaded screw. One contact is given by the metal case while the other contact is a smaller, from the case insulated, metal plate opposite to the piston and in contact with the carbon powder. A feed through is provided by a screw for electrical connection. The resistance range, depending on pressure, is typically from 5 kΩ to 1 MΩ.

  • Nettogewicht
  • 0.037 kg / 0 lb 1.3 oz (0.081 lb)
  • Originalpreis
  • 3.50 Kr
  • Literaturnachweis
  • Jan Thogersen - The Bang and Olufsen Collection 1925 -1949 )
  • Literatur/Schema (1)
  • - - Manufacturers Literature (Advert. 1929)
  • Autor
  • Modellseite von Albert Walenta angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Højohmsmodstand befindet sich in den Sammlungen folgender Mitglieder.

 Forum