Adaptateur d'Impédances 4026

Bouyer, Paul (Harmonic Radio); Montauban, Paris

  • Year
  • 1953–1965
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 118301

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Wave bands
  • - without
  • Power type and voltage
  • No Power needed
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 4 inch = 10.2 cm
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Adaptateur d'Impédances 4026 - Bouyer, Paul Harmonic Radio;
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 275 x 275 x 125 mm / 10.8 x 10.8 x 4.9 inch
  • Notes
  • Adaptation automatique d'impédances de 4 à 1000 ohms dans toute installation de 5 à 50 watts. Mesure d'impédances de 4 à 1000 ohms.

    Écran clignotant au rythme de la modulation.


    Impedance adapter to connect an amplifier with 4, 8, 15, 250 or 500 Ohms to a speaker installation in the range of 4 to 1000 Ohms.Audio power 5 to 50 W.

    Instant measurement by comparison of two halves of a screen lit by two lamps blinking at the rate of modulation, adaptation in 19 steps.

  • Net weight (2.2 lb = 1 kg)
  • 6.8 kg / 14 lb 15.6 oz (14.978 lb)
  • Mentioned in
  • -- Original prospect or advert (Catalogue Général 1954)
  • Literature/Schematics (1)
  • - - Manufacturers Literature

 Collections | Museums | Literature

Collections

The model Adaptateur d'Impédances is part of the collections of the following members.

 Forum