Stabilised DC Heater Supply TC.66

Brandenburgh Ltd.; South Croydon

Datos
Foro
Imágenes
Colecciones

  • Año
  • 1962
  • Categoría
  • Fuente de alimentación o bateria o estabilizador de tensión
  • Radiomuseum.org ID
  • 332894

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Tensión de funcionamiento
  • Alimentado desde otro equipo o aparato principal. / 2 x 6.3V in series; 12.6 Volt
  • Altavoz
  • - - No hay salida de sonido.
  • de Radiomuseum.org
  • Modelo: Stabilised DC Heater Supply TC.66 - Brandenburgh Ltd.; South
  • Ancho, altura, profundidad
  • 3 x 4 x 2 inch / 76 x 102 x 51 mm
  • Anotaciones

  •  The low voltage stabilizer type TC.66 provides a stabilized direct current valve heater supply that is stable against mains input variations and has a very low ripple content. With an input of 12.6V RMS at 0.75A (or two 6.3V in series), it has a variable output of from 6 to 6.7V with a current output of from 150mA to 600mA. Control of output is by potentiometer, the adjusting spindle of which can be seen in the near left-hand corner on top of the case. The output ripple is less than 5mV peak-to-peak at full load and the stability for ±10% mains variation is better than 1%. Regulation minimum to maximum load is also better than 1%.

  • Mencionado en
  • Electronic Engineering volume 34, August 1962.
  • Autor
  • Modelo creado por Pier Antonio Aluffi. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum