Low Distortion Sine and Square Wave Generator 141

BWD Electronics Pty Ltd.; Mulgrave, Victoria

Données
Forum
Images
Collections

  • Année
  • 1972
  • Catégorie
  • Appareils de mesure et de dépannage (matériel de labo)
  • Radiomuseum.org ID
  • 329189

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de transistors
  • 8
  • Gammes d'ondes
  • Bandes en notes
  • Tension / type courant
  • Secteur et Piles (tous types).
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Low Distortion Sine and Square Wave Generator 141 - BWD Electronics Pty Ltd.;
  • Forme
  • Modèle de table générique
  • Dimensions (LHP)
  • 210 x 150 x 150 mm / 8.3 x 5.9 x 5.9 inch
  • Remarques

  • The BWD 141 Audio Oscillator is an all-silicon Solid-State Sine and Square Wave Generator powered by self-contained dry batteries (276-P) with 2 optional mains power packs available.

    1. Mains power pack.
    2. NI-CAD battery and mains charger.

    The wide frequency range of 1 Hz to 1 MHz together with its output attenuator and level control makes it suitable for both bench and field work.

    A balanced output is available by connecting a centre tapped resistor across the output terminals. Sine or Square Wove output is available by switch selection.

    Specifications:

    Sine Wave

    • Frequency Range:  1 Hz to I MHz in six-decade ranges.
      Frequency Vernier: 4-1 slow motion drive.
    • Frequency Calibration:  10Hz to 1 MHz 5%, 1 Hz to 10 Hz 5% ± 1 Hz
    • Output Level:  Within ±0.25db (3%) over entire range.
    • Output Voltage: 0 - 2.5V rms (7.07V p-p) continuously variable into a high impedance, DC level is zero.
    • Distortion: <0.1% from 100 Hz to 100 kHz, increasing to <1% at 5Hz& 1 MHz

    Square Wave

    • Frequency Range:  1 Hz to 1 MHz in six-decade ranges.
      Frequency Vernier: 4-1 slow motion drive.
    • Frequency Calibration:  10Hz to 1 MHz 5%, 1 Hz to 10 Hz 5% ± 1 Hz
    • Output Level:  Within ±3% over entire range into a low-capacity load
    • Output Voltage: 0 - 2.5V p-p into a high impedance load
    • Output Polarity: Positive going with respect to common.
    • Rise Time: Less than 100 mSec into 600 ohms and less than 100 pF shunt capacity

     

  • Poids net
  • 2.5 kg / 5 lb 8.1 oz (5.507 lb)
  • Littérature
  • - - Manufacturers Literature
  • Auteur
  • Modèle crée par Gary Cowans. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum