Sonic Holography Integrated Amplifier CM-1090
Carver Corporation; Lynnwood (WA)
- Country
- United States of America (USA)
- Manufacturer / Brand
- Carver Corporation; Lynnwood (WA)
- Year
- 1989
- Category
- Audio Amplifier or -mixer
- Radiomuseum.org ID
- 279057
Click on the schematic thumbnail to request the schematic as a free document.
- Main principle
- Audio-Amplification
- Wave bands
- - without
- Power type and voltage
- Alternating Current supply (AC) / 60Hz, 120; 50Hz, 220 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 300 W (undistorted)
- Material
- Metal case
- from Radiomuseum.org
- Model: Sonic Holography Integrated Amplifier CM-1090 - Carver Corporation; Lynnwood
- Shape
- Rack
- Dimensions (WHD)
- 19 x 4.5 x 14.5 inch / 483 x 114 x 368 mm
- Notes
-
Carver Sonic Holography Integrated Amplifier Model CM-1090.
Power output:
100 watts per channel into 8Ω (stereo)
150 watts per channel into 4Ω (stereo)
Frequency response: 20Hz to 20kHz ± 1dB
Total harmonic distortion: 0.1%
Signal to noise ratio: 78dB (MM), 90dB (line)
Phono Gain: 36dB
Phono IN, Tuner IN, CD IN, Video1 IN, Video2/AUX IN, Tape1 IN OUT, Tape2 IN OUT
PreAmp/Main OUT IN
Tone Control Turnover Frequencies: 100, 1000, 10000Hz
Speaker Impedance A or B 8 Ohms min., A+B 16 Ohms min.
AC Outlets:
2x Switched 120VAC Total 200 Watts max.
2x Unswitched 120VAC Total 300 Watts max.
Sonic Hologram Generator Image Resolution: 5° horizontal, 20° vertical
Patent Notice:
United States Patent Number 4,218,585
- Net weight (2.2 lb = 1 kg)
- 21 lb (21 lb 0 oz) / 9.534 kg
- Mentioned in
- - - Manufacturers Literature (Service Manual)
- Literature/Schematics (1)
- - - Manufacturers Literature (Instruction / Owners Manual)
- Author
- Model page created by Franz Scharner. See "Data change" for further contributors.
- Other Models
-
Here you find 14 models, 6 with images and 1 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Carver Corporation; Lynnwood (WA)