Dual Noise Gate 363X

dbx Inc.; Waltham (MA)

Data
Forum
Pictures
Collections

  • Year
  • 1990 ??
  • Category
  • Miscellaneous (Other, Various) - see notes
  • Radiomuseum.org ID
  • 298229

 Technical Specifications

  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 120/240 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Dual Noise Gate 363X - dbx Inc.; Waltham MA
  • Shape
  • Rack
  • Dimensions (WHD)
  • 1.75 x 8.5 x 7.25 inch / 44 x 216 x 184 mm
  • Notes

  • INPUT CHARACTERISTICS
    Key Input: Unbalanced 20kΩ
    Maximum key Input Level: +20dBu
    Key Input Connector Type: 1/4" Phone Jack
    Audio input Impedance: Unbalanced = 10kΩ
    Maximum Audio Input Level: +18dBu
    Audio Input Connector Type: 1/4" Phone Jack

    OUTPUT CHARACTERISTICS
    Output Source Impedance: Unbalanced = 22Ω, Phone
    Maximum Output Level: +18dBu into 600Ω
    Minimum Load Impedance: Greater than or equal to 600Ω
    Connector Type: 1/4" Phone Jack

    PERFORMANCE CHARACTERISTICS
    Frequency Response: 20Hz-20kHz (+/-0.5dB)
    THD Distortion: <0.08% Any amount of compression @1kHz
    IMD Distortion: <0.2% SMPTE
    Equivalent Input Noise: -85dBu Unweighted
    Dynamic Range: 103dB
    Attack Time: <100us
    Release Time: 30ms-9sec
    Treshold Range: -90 to +20dBu
    Treshold Characteristic: Hard-Knee
    Attenuation: 90dB
    Hold Time: Adjustable, 0 to 3sec

    Power Consumption: 7W
    Made in Hong Kong

  • Net weight (2.2 lb = 1 kg)
  • 2.5 lb (2 lb 8 oz) / 1.135 kg
  • Author
  • Model page created by Bartosz Szwed. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Dual Noise Gate is part of the collections of the following members.

 Forum