Integrated Amplifier PMA-510AE

Denon (Marke / brand)

  • Year
  • 2009
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 283155

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Remote Control (with wire or wireless)
  • Power type and voltage
  • Alternating Current supply (AC) / 230 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 90 W (140 W max.)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Integrated Amplifier PMA-510AE - Denon Marke / brand
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 434 x 121 x 307 mm / 17.1 x 4.8 x 12.1 inch
  • Notes
  • A stereo hi-fi integrated amplifier in a black or silver metal case with remote control  (RC-1131).  Denon's Signal Level Divided Construction (S.L.D.C.) and  High Current Single Push-Pull Circuit. RCA input sockets for Phono (MM), CD, Tuner and Line, RCA Record/Playback sockets for 2 Tape Recorders, terminals for 2 pairs of loudspeakers, jack for headphones and a switched AC outlet. Rotary Bass and Treble tone controls, buttons for Loudness and Source Direct.

    Specification
    Power amplifier section
    Rated output:       45 W + 45 W (8 ohms, 20 Hz - 20 kHz, THD 0.07%)
                               70 W + 70 W (4 ohms, 1 kHz, THD 0.7%)
    Total harmonic distortion: 0.02% (8ohms, 1 kHz)
    Preamplifier section
    Phono equalizer
    Rated output              150 mV (REC out terminal)
    Input sensitivity / Impedance :
                          Line    100 mV/47 kohms (Source Direct: OFF)
                                    100 mV/16 kohms (Source Direct: ON)
                          Phono  2.5 mV/47 kohms
    RIAA deviation Phono  20 Hz - 20 kHz, ±0.5 dB
    Signal-to-noise ratio (IHF A network):
                          Line    105 dB (Source Direct: ON)
                          Phono  84 dB (MM) (input terminals shorted, input signal 5 mV)
    Input sensitivity:          2.5mV (MM), 100mV (line)
    Signal to noise ratio:   84dB (MM), 105dB (line)
    Speaker load impedance: 4 Ohm  to 16 Ohm

    Power Requirements
    Power supply             230V AC, 50 Hz
    Power consumption    185 W (Stand-by: less than 0.3 W)

    Made in China

  • Net weight (2.2 lb = 1 kg)
  • 6.5 kg / 14 lb 5.1 oz (14.317 lb)
  • Mentioned in
  • -- Original prospect or advert (Denon 2009-2010 General Catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Denon New Product Information sheet PMA-510A Integrated Amplifier)
  • Author
  • Model page created by Bartosz Szwed. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Integrated Amplifier is part of the collections of the following members.

 Forum