Integrated Amplifier PMA-510AE

A stereo hi-fi integrated amplifier in a black or silver metal case with remote control  (RC-1131).  Denon's Signal Level Divided Construction (S.L.D.C.) and  High Current Single Push-Pull Circuit. RCA input sockets for Phono (MM), CD, Tuner and Line, RCA Record/Playback sockets for 2 Tape Recorders, terminals for 2 pairs of loudspeakers, jack for headphones and a switched AC outlet. Rotary Bass and Treble tone controls, buttons for Loudness and Source Direct.

Specification
Power amplifier section
Rated output:       45 W + 45 W (8 ohms, 20 Hz - 20 kHz, THD 0.07%)
                           70 W + 70 W (4 ohms, 1 kHz, THD 0.7%)
Total harmonic distortion: 0.02% (8ohms, 1 kHz)
Preamplifier section
Phono equalizer
Rated output              150 mV (REC out terminal)
Input sensitivity / Impedance :
                      Line    100 mV/47 kohms (Source Direct: OFF)
                                100 mV/16 kohms (Source Direct: ON)
                      Phono  2.5 mV/47 kohms
RIAA deviation Phono  20 Hz - 20 kHz, ±0.5 dB
Signal-to-noise ratio (IHF A network):
                      Line    105 dB (Source Direct: ON)
                      Phono  84 dB (MM) (input terminals shorted, input signal 5 mV)
Input sensitivity:          2.5mV (MM), 100mV (line)
Signal to noise ratio:   84dB (MM), 105dB (line)
Speaker load impedance: 4 Ohm  to 16 Ohm

Power Requirements
Power supply             230V AC, 50 Hz
Power consumption    185 W (Stand-by: less than 0.3 W)

Made in China

Donde encontrará 473 modelos, 467 con imágenes y 49 con esquemas.
Ir al listado general de Denon (Marke / brand)