Precision Audio Component / Integrated Stereo Amplifier PMA-715RG

A stereo hi-fi integrated amplifier in a gold metal case with wooden side panels, with remote control (RC-176), output power of 65 Watts per channel into 8 Ohms. Denon's Super Stable A Bias control for short warm-up times and stable operation under all conditions.  RCA input sockets for Phono (MM or MC with switch), CD, Tuner and Aux, RCA Record/Playback sockets for 2 DAT/Tape Recorders,  terminals for 2 pairs of loudspeakers, a jack for headphones and 2 switched and 1 unswitched AC outlets. Rotary Bass and Treble tone controls, buttons for Loudness and Source Direct.

Specification
Power Amp Section
Rated output,                      65 W + 65 W (8 ohms, 20Hz - 20kHz, 0.05% THD)
   both channels driven       100 W + 100 W (4 ohms, DIN, 1 kHz, 0.7% THD)
Continuous 65W per channel min into 8 ohms
   from 20 Hz to 20 kHz with no more than 0.05% total harmonic distortion.
Total Harmonic Distortion:  0.007% (-3dB at rated output, 8 ohms)
Preamplifier Section
Rated Output:                  150 mV (Recout Terminal)
Input Sensitivity/Impedance
  PHONO  MM:                 2.5 mV/47 kohm
                MC:                 200 µV/ 100 ohm
  CD, TUNER, AUX,
  TAPE-1, TAPE-2:           150 mV/47 kohm; 150 mV/10 kohm (Source Direct ON)
RIAA Deviation:
  PHONO:                        20 Hz - 20 kHz Within ±0.3 dB
Overall Characteristics
S/N Ratio (IHF A Network)
(input terminals short-circuited) Source Direct ON:
  PHONO MM:                94 dB (at 5mV input)
               MC:                76 dB (at 0.5mV input)
  CD, TUNER, AUX,
  TAPE-1, TAPE-2:        110 dB

Versions/Power Requirements
Japan / 100V AC 50/60Hz
Europe, Australia  / 230V AC 50Hz
USA Canada  / 120V 60Hz
Multiple / 110/120/220/240 50/60Hz with voltage selector

Same as the Denon PMA-715R Integrated Stereo Amplifier which is in a black metal case without wooden side panels.

Donde encontrará 473 modelos, 467 con imágenes y 49 con esquemas.
Ir al listado general de Denon (Marke / brand)