A stereo hi-fi integrated amplifier with remote control (RC-151) with output power of 90 watts per channel into 8 ohms. Class A output. Bass and Treble rotary controls, buttons for Loudness, Subsonic filter and Source Direct. RCA input sockets for CD, Tuner, Aux, Phono (MM or MC), input/output sockets for 2 DAT/Tape recorders, output terminals for 2 pairs of loudspeakers and a jack for headphones. Remote Control connection for a Denon Tape Recorder, 1 unswitched and 2 switched AC outlets (Canada only).
Specification
Power Amplifier Section
Rated Output Power:
Both channels driven
(8 ohm Load) 90W + 90W 20 Hz to 20 kHz, T.H.D. 0.01%
(4 ohm Load) 150W + 150W DIN, 1 kHz, T.H.D. 0.7%
Continuous 90W per channel min into 8 ohms from 20 Hz to 20 kHz
with no more than 0.01% total harmonic distortion
Total Harmonic Distortion: 0.007% (-3dB at rated output, 8 ohms)
Pre-Amplifier Section
Rated Output: 150 mV
(Recout Terminal)
Input Sensitivity/Input Impedance:
PHONO: MM 2.5 mV/47 kohm
MC 200 µV/100 ohm
CD, TUNER AUX
TAPE-1, TAPE-2: 150 mV/47 kohm, 150 mV/10 kohm (Source Direct ON)
RIAA Deviation:
PHONO:
Within ±0.3dB 20 Hz - 20 kHz
Maximum Input: PHONO
MM 160 mV/ 1 kHz
MC 12mV/1 kHz
Overall Characteristics
S/N Ratio (IHF A Network):
PHONO: MM: 94 dB (at 5 mV input)
MC: 76 dB (at 0.5 mV input)
CD, TUNER, AUX
TAPE-1, TAPE-2: 110 dB
(input terminals short-circuited, Source Direct ON)
Versions/Power Requirements
Europe / 220V AC 50Hz
Canada / 120V AC 60Hz
Peso neto
9.8 kg / 21 lb 9.4 oz (21.586 lb)
Mencionado en
-- Original prospect or advert (Denon 1992-1993 HiFi catalogue)
Documentación / Esquemas (1)
- - Manufacturers Literature (Operating Instructions PMA-980R Integrated Stereo Amplifier)
Autor
Modelo creado por Walter Buchberger. Ver en "Modificar Ficha" los participantes posteriores.