Precision Audio Component / Integrated Amplifier PMA-S10 II

An Integrated Stereo Hi-Fi Amplifier with output power of 100 Watts per channel into 8 ohms. Remote control (RC-185) supplied with the European version. Ultra High Current MOSFET Single Push-Pull circuit. RCA input sockets for Phono (MM or MC with switch), CD, Tuner, DVD/Aux1 and Aux2, RCA Record/Playback sockets for 2 DAT/MD/Tape Recorders,  terminals for 2 pairs of loudspeakers or bi-wiring, a jack for headphones and 2 switched and 1 unswitched AC outlets. Rotary Bass and Treble tone controls, button for Tone Defeat.

Specification
Power Amp Section
Rated output,                    100 W + 100 W (8 ohms, 20Hz - 20kHz, 0.07% THD)
   both channels driven       200 W + 200 W (4 ohms, DIN, 1 kHz, 0.7% THD)
Total Harmonic Distortion:  0.01% (-3dB at rated output, 8 ohms, 1 kHz)
Preamplifier Section
Rated Output:                   150mV (Recout Terminal)
Input Sensitivity/Impedance
  PHONO  MM:                 2.5 mV/47 kohms
                MC:                 200µV /100ohms
  CD, TUNER, AUX,
  TAPE-1, TAPE-2:           150 mV/47 kohm; 150 mV/15 kohm (Source Direct ON)
RIAA Deviation:
   PHONO                        20Hz - 20kHz (within ± 0.3dB)
Overall Characteristics
Signal to noise ratio (IHF A Network)
(input terminals short-circuited)
   PHONO MM:                  91 dB (at 5 mV input)
                MC:                  76 dB (at 0.5mV input)
 Source Direct ON :
  CD, TUNER. DVD/AUX,
  TAPE1/DAT, TAPE2/MD: 110dB

Versions/Power Requirements
Japan, Far East  / 100V AC 50/60Hz
Europe  / 230V AC 50Hz

In questo link sono elencati 473 modelli, di cui 467 con immagini e 49 con schemi.
Elenco delle radio e altri apparecchi della Denon (Marke / brand)