Stereo 120 ST-120
Dyna Co. (Dynaco); Philadelphia PA
- Produttore / Marca
- Dyna Co. (Dynaco); Philadelphia PA
- Anno
- 1967–1977
- Categoria
- Amplificatore audio o mixer audio
- Radiomuseum.org ID
- 233857
aus ebay, #293963397989, Verkäufer atlusllc
aus ebay, #293963397989, Verkäufer atlusllc
aus ebay, #293963397989, Verkäufer atlusllc
aus ebay, #293963397989, Verkäufer atlusllc
Clicca sulla miniatura dello schema per richiederlo come documento gratuito.
- Numero di tubi
- 15
- Valvole
- Numero di transistor
- 15
- Principio generale
- Amplificatore audio; ZF/IF N/A kHz
- Gamme d'onda
- - senza
- Tensioni di funzionamento
- Alimentazione a corrente alternata (CA) / 120 Volt
- Altoparlante
- - Questo apparecchio richiede altoparlante/i esterno/i.
- Potenza d'uscita
- 120 W (150 W max.)
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Stereo 120 ST-120 - Dyna Co. Dynaco; Philadelphia
- Forma
- Apparecchio per ripiani a scaffale (come i componibili HiFi).
- Dimensioni (LxAxP)
- 13 x 10.5 x 4 inch / 330 x 267 x 102 mm
- Annotazioni
-
The Dyna Co. Stereo 120 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5, or for use with tape recorders or tuners such as the FM-5 or AF-6, which have their own volume controls. The Stereo 120 contains two 60 watt amplifiers on one chassis with a common power supply.
Although the Stereo 120 is a solid state device containing transistors and similar semi-conductors, it has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. Thus it can be connected to source and speaker components and used with confidence in all conventional arrangements. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 120 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier.
The components of the Stereo 120 are of the highest quality to protect against failure, both now and for many years in the future. All parts are used conservatively with close tolerances to assure continued proper operation, and etched circuit modules have been pretested under actual use conditions to ensure that every unit, after assembly, will meet the specifications normally associated only with laboratory prototypes.
The specifications of the Stereo 120 speak for themselves. The distortion and noise, up to levels well beyond those required to drive any conventional amplifier, are comparable to the finest tube designs while the high power distortion remains inaudible. Specifications do not reveal all the facets of superior audio performance, however. In use with varying program material, the Stereo 120 achieves its design goals of sonic ease and naturalness always sought but rarely achieved in solid state designs. There is remarkable clarity and an impression of direct contact with the original without the extra brightness or stridency which, unfortunately, is sometimes attributed to high fidelity sound, but rather there is an impression of limitless range and effortless handling of the highest power peaks.
- Peso netto
- 20 lb 0 oz (20 lb) / 9.080 kg
- Prezzo nel primo anno
- 289.00 Dollar
- Bibliografia
- - - Manufacturers Literature ($289.00 assembled)
- Autore
- Modello inviato da Randy McDaniels. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 28 modelli, di cui 28 con immagini e 19 con schemi.
Elenco delle radio e altri apparecchi della Dyna Co. (Dynaco); Philadelphia PA
Collezioni
Il modello Stereo 120 fa parte delle collezioni dei seguenti membri.