Ionofane 601

Fane Acoustics Ltd., Batley, Yorkshire

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1965 ??
  • Kategorie
  • Lautsprecher, Kopfhörer oder Ohrhörer
  • Radiomuseum.org ID
  • 210762

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 1
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Externes Speisegerät / Netzgerät / Hauptgerät / 220 Volt
  • Lautsprecher
  • Trichter
  • Belastbarkeit / Leistung
  • 5 W (Qualität unbekannt)
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Ionofane 601 - Fane Acoustics Ltd., Batley,
  • Bemerkung
  • Plasma tweeter (Ionophon). Guest Kate Glover told us: My father, Stephen Webb, used to work at Fane Acoustics as a teenager before joining the BBC and he in fact hand-built some of the first Ionofane speakers at the age of 18.
  • Autor
  • Modellseite von Leif Aden angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Ionofane befindet sich in den Sammlungen folgender Mitglieder.

 Forum

Forumsbeiträge zum Modell: Fane Acoustics Ltd.,: Ionofane 601

Threads: 2 | Posts: 2

Hi,

The Visaton transformer has arrived, I hope it will work I'm not shure about the quality as it is a line transformer used in PA installations.

The transformer seems to be made as a mains transformer not EI with air gap configuration like an audio transformer, I have run a simple test, from ~3kHz to 20kHz and it has a resonable frequency response.

The guys at Sowter can make a much better transformer, but it will be very expensive.

I also have done some cleaning and resoldering, a kind of remake using PTFE sleeves.

As one can see the chokes connected to tube sockets and the feedthrough capacitors is not a good idea, I will mount the feedtrough caps so I can take the assy' out as a package.

Regards

Leif

Leif Aden, 29.Jan.12

Weitere Posts (1) zu diesem Thema.

The pictures are from my workshop and shows the Ionofane parts in a box, the other pictures shows original power supply and my project to restore the power supply with used and new parts.

The original transformer is an autotransformer, I have replaced it with a Tandberg 220V primary transformer with secondary windings for AC 300V and AC 6.3V just to make it more reliable.

So now I'm waiting for a modulation transformer, this small transformer should fit in the box together with the parts as shows in the picture.

My intentions is to make this product as near original as possible without spending too much money.

Leif Aden, 23.Jan.12

Weitere Posts (1) zu diesem Thema.