Sine/Square Wave Oscillator

Farnell Instruments Ltd.; Wetherby

Data
Forum
Pictures
Collections

  • Year
  • 1964 ??
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 339617

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Wave bands
  • - without
  • Power type and voltage
  • Line / Batteries (any type)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Sine/Square Wave Oscillator - Farnell Instruments Ltd.;
  • Shape
  • Tablemodel, with any shape - general.
  • Notes

  • This transistorized sine/square oscillator has been designed for general electrical or mechanical purposes in industrial or educational establishments.

    Powered directly from the mains supply or from internal batteries.

    1 Hz to 100 kHz frequency range is provided by a resistance-capacitance oscillator bridge.

    A 3 % accuracy of dial reading ± 0.5 Hz is maintained throughout the whole range.

    Sinewave output has less than 2% harmonic distortion.

    Rise & fall times of the square wave output are less than 0.3 µsec, the sag or overshoot being less than 5%.

    The attenuator is calibrated into a 600 Ω load; Four switch positions, 0dB, -20 dB, -40 dB and -60 dB in addition to a continuously variable control covering the range -6 dB to +14 dB; accuracy is within 3 %.

    The maximum output is 12V peak-to-peak into 600 Ω.

  • Mentioned in
  • “Electronic Engineering”, volume 36, June 1964.
  • Author
  • Model page created by Pier Antonio Aluffi. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum