DC Double Beam Oscilloscope 0.180

Furzehill Laboratories Ltd.; Hertfordshire

Data
Forum
Pictures
Collections

  • Year
  • 1962 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 330298

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC)
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: DC Double Beam Oscilloscope 0.180 - Furzehill Laboratories Ltd.;
  • Shape
  • Tablemodel, high profile (upright - NOT Cathedral nor decorative).
  • Notes

  • A direct coupled double beam oscilloscope which provides identical amplifiers on each vertical channel suitable for unbalanced or balanced signals, giving a common mode rejection of better than 100:1. Sensitivity / bandwidth (3dB) 1.5mV/cm, d.c. to 100kHz and 5mV/cm to 50V/cm, d.c. to 150kHz.  For curve tracing one of the vertical amplifiers can be switched to horizontal deflexion, providing equivalent facilities on each axis at a maximum sensitivity of 3mV/cm. A calibrated triggered time-base gives sweep speeds from 0.1µsec to 0.5sec/cm, and the time-base amplifier can be alternatively used for external signals in the range 10Hz to 1MHz.

  • Mentioned in
  • Electronic Engineering, volume 34 April 1962
  • Author
  • Model page created by Pier Antonio Aluffi. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum