DC Double Beam Oscilloscope 0.180

Furzehill Laboratories Ltd.; Hertfordshire

  • Jahr
  • 1962 ?
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 330298

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: DC Double Beam Oscilloscope 0.180 - Furzehill Laboratories Ltd.;
  • Form
  • Tischgerät, Hochformat (höher als quadratisch, schlicht, keine Kathedrale).
  • Bemerkung
  • A direct coupled double beam oscilloscope which provides identical amplifiers on each vertical channel suitable for unbalanced or balanced signals, giving a common mode rejection of better than 100:1. Sensitivity / bandwidth (3dB) 1.5mV/cm, d.c. to 100kHz and 5mV/cm to 50V/cm, d.c. to 150kHz.  For curve tracing one of the vertical amplifiers can be switched to horizontal deflexion, providing equivalent facilities on each axis at a maximum sensitivity of 3mV/cm. A calibrated triggered time-base gives sweep speeds from 0.1µsec to 0.5sec/cm, and the time-base amplifier can be alternatively used for external signals in the range 10Hz to 1MHz.

  • Literaturnachweis
  • Electronic Engineering, volume 34 April 1962
  • Autor
  • Modellseite von Pier Antonio Aluffi angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum