Digital Impedance Meter 1685

General Radio Company; Cambridge (MA)

  • Año
  • 1975 ?
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 257672
    • alternative name: GenRad

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 90-127;180-253 at 48-440Hz Volt
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Digital Impedance Meter 1685 - General Radio Company;
  • Forma
  • Sobremesa apaisado (tamaño grande).
  • Ancho, altura, profundidad
  • 432 x 142 x 413 mm / 17 x 5.6 x 16.3 inch
  • Anotaciones
  • The 1685 Digital Impedance Meter is an all solid-state instrument that automatically measures series capacitance and inductance at two frequencies, 120Hz and 1 kHz, and measures resistance at DC. These measurements can be made on command or repetitively, with measurement time variable between 0.25 s and 10 s , with results furnished by means of a digital readout display.

    The basic accuracy is 0.1% +2 counts for DC and 1 kHz measurements and 0.5% + 1 count for 120 Hz measurements. For DC and 1 kHz measurements, the full-scale digital readout indication is 19999; for 120 Hz operation it is 1999.

    The decimal points and units are also displayed; the units are displayed on the RANGE switch dial. The range is manually set.

    The meter measures capacitance from .01 pF (one digit) to 20,000 µF, inductance from .01 µH to 2,000 H and resistance from 0.1 mΩ to 20 MΩ.

    For ac measurements, the dissipation factor, D, or quality factor, Q, is also indicated. The value of D or Q is obtained by a manual dial adjustment. However, if this dial is set to the desired D or Q limit, there is an automatic indication if their value is exceeded. An optional limit Comparator (High/Low) can be added to the instrument.

  • Peso neto
  • 10.2 kg / 22 lb 7.5 oz (22.467 lb)
  • Mencionado en
  • - - Manufacturers Literature
  • Autor
  • Modelo creado por Antonio Marra. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Digital Impedance Meter es parte de las colecciones de los siguientes miembros.

 Forum