• Año
  • 1945 ??
  • Categoría
  • Aparato de medida y servicio (Equipo de laboratorio).
  • Radiomuseum.org ID
  • 82987
    • alternative name: GenRad

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Principio principal
  • Detector de Galena o semi-conducteur
  • Tensión de funcionamiento
  • No necesita alimentación
  • Material
  • Madera
  • de Radiomuseum.org
  • Modelo: Output Meter 583-A - General Radio Company;
  • Forma
  • Sobremesa, caja, normalmente con tapa (panel no inclinado).
  • Ancho, altura, profundidad
  • 10 x 6 x 7 inch / 254 x 152 x 178 mm
  • Anotaciones
  • The device is used to match the impedance of the measuring instrument to the amplifier output.

    Ability to adapt the input to the impedance of the device being measured with two adjustments: The primary of the input transformer has four positions: x0.1 - x1 - x10 - x100. The secondary has the following positions: 25 - 30 - 40 - 50 - 60 - 80 - 100 - 125 - 200. Therefore impedances can be obtained from 2.5 to 20,000 Ω.
    Power input : 5 mW - 50 mW - 500 mW - 5 W.
    Maximum error in impedance measurement: 20%, in power measurement: 30% (between 20 and 20,000 Hz).

  • Peso neto
  • 3.7 kg / 8 lb 2.4 oz (8.15 lb)
  • Precio durante el primer año
  • 155.00 $
  • Procedencia de los datos
  • -- Original-techn. papers.
  • Mencionado en
  • Strumenti Elettrici di Misura, Arturo Recla, Italy, Radio Industria editor,June 1947.
  • Autor
  • Modelo creado por Felix Schaffhauser. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Output Meter es parte de las colecciones de los siguientes miembros.

 Forum