- Land
- USA
- Hersteller / Marke
- General Electric Co. (GE); Bridgeport CT, Syracuse NY
- Jahr
- 1951 ?
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 41947
-
- Marke: Musaphonic
Beitman
FRom Canadian eBay seller belmont_antiques""
280172113270
280172113270
RECONSTRUCTED LABEL
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Röhren
- 5
- Hauptprinzip
- Superhet allgemein; ZF/IF 455 kHz; 2 NF-Stufe(n)
- Anzahl Kreise
- 6 Kreis(e) AM
- Wellenbereiche
- Mittelwelle, keine anderen.
- Betriebsart / Volt
- Wechselstromspeisung / 60 Hz, 117V = 110 -120 Volt
- Lautsprecher
- Dynamischer LS, keine Erregerspule (permanentdynamisch) / Ø 4 inch = 10.2 cm
- Material
- Plastikgehäuse (nicht Bakelit), Thermoplast
- von Radiomuseum.org
- Modell: 516F - General Electric Co. GE;
- Form
- Tischgerät mit integrierter Uhr (Uhrenradio, Radiowecker).
- Abmessungen (BHT)
- 11.5 x 6 x 5.5 inch / 292 x 152 x 140 mm
- Bemerkung
-
General electric model 516F is an AC operated superheterodyne receiver with electric clock.
- Datenherkunft extern
- Ernst Erb
- Datenherkunft
- Collector's Guide to Antique Radios 4. Edition
- Schaltungsnachweis
- Rider's Perpetual, Volume 22, covering 1951
- Literaturnachweis
- The Radio Collector's Directory and Price Guide 1921 - 1965 (Beitman Radio Diagrams 1951)
- Literatur/Schema (1)
- Photofact Folder, Howard W. SAMS (Date 9-51, Set 143, Folder 7)
- Weitere Modelle
-
Hier finden Sie 2916 Modelle, davon 2139 mit Bildern und 2042 mit Schaltbildern.
Alle gelisteten Radios usw. von General Electric Co. (GE); Bridgeport CT, Syracuse NY
Forumsbeiträge zum Modell: General Electric Co.: 516F
Threads: 1 | Posts: 1
General Electric516F USA import. It may be of interest to fellow enthustists How I fix this radio .Firstly I
-see if any previous work done. I replaced the tubes with a set of good tubes for testing .I don't switch on just yet. I check for shorts and the filter condenser capacitance ( was over 50uf ) -that was fine .I reform the condenser from 26mA to 0.5mA This may be done by placing the condenser in series with two 15-watt electric lamps(series connected) and a DC supply.When first connected the lamps will probably light ,after some time will cease to glow.I like to have a meter set to mA to see progress.Next job switch on Dead -mains switch open circuit I solder a wire link( for testing) -still dead -My mistake it is a clock radio I removed the clock at the beginning . The radio now works well. I don.t change resistors or condensers only, if I have to . I do check coupling condensers -That's it.
James Booth, 13.Jan.17