• Jahr
  • 1934
  • Kategorie
  • Rundfunkempfänger (Radio - oder Tuner nach WW2)
  • Radiomuseum.org ID
  • 232545
    • Marke: Musaphonic

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 5
  • Hauptprinzip
  • Superhet allgemein; ZF/IF 460 kHz; 2 NF-Stufe(n)
  • Anzahl Kreise
  • 6 Kreis(e) AM
  • Wellenbereiche
  • Mittelwelle und Kurzwelle.
  • Betriebsart / Volt
  • Wechselstromspeisung / Either transformer: 50-60Hz, 105-125V or 25-60Hz, 105-125V or 50-60Hz, 200-250 Volt
  • Lautsprecher
  • Dynamischer LS, mit Erregerspule (elektrodynamisch)
  • Belastbarkeit / Leistung
  • 1.75 W (3.5 W max./spitze)
  • Material
  • Gerät mit Holzgehäuse
  • von Radiomuseum.org
  • Modell: M-51 - General Electric Co. GE;
  • Form
  • Tischgerät-gross, - Querformat (breiter als hoch oder quadratisch).
  • Abmessungen (BHT)
  • 14.75 x 18.25 x 10 inch / 375 x 464 x 254 mm
  • Bemerkung
  • The General Electric M-51 is an AC operated 5 tube BC and SW Band receiver.

    Band Frequency Ranges are as follows:
    BC Band.............540-1720kHz
    SW Band............5.40-18.00MHz

    Chassis and schematic used in this model also used in General Electric early production model M-56.

  • Originalpreis
  • 44.95 USD
  • Datenherkunft
  • - - Manufacturers Literature
  • Literatur/Schema (2)
  • -- Original prospect or advert (Dayton Herald (newspaper), 14 Dec, 1934)
  • Autor
  • Modellseite von John Kusching angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell M-51 befindet sich in den Sammlungen folgender Mitglieder.

 Forum

Forumsbeiträge zum Modell: General Electric Co.: M-51

Threads: 1 | Posts: 2

 

Hello Antique Radio Experts

 

I am working on bringing this 1934 GE M-51 Back to life.

I have at this point cleaned the chassis and replaced deteriorated cloth wiring.

All the paper and electrolytic capacitors have also been replaced. 

When I fired this old girl up she was completely soundless.  Power supplies looked good.

After a bit more investigation I found the audio output matching transformer has an open primary winding.   The speaker voice coil is good, along with the field coil.   If I could find an output transformer with 450 ohm primary and 4 ohm secondary I am sure I can bring this old girl back to life. 

Suggestion on where to find a transformer or other possible work around would be helpful.

 

 

Thanks for the Help

Bobstetz@msn.com

 

Bob

 

 

Robert Stetz, 17.Aug.20

Weitere Posts (2) zu diesem Thema.