Sinfonia 4R/422
Graetz, Altena (Westfalen)
- Hersteller / Marke
- Graetz, Altena (Westfalen)
- Jahr
- 1956/1957
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 81180
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Röhren
- 7
- Hauptprinzip
- Superhet allgemein; ZF/IF 460/10700 kHz
- Anzahl Kreise
- 8 Kreis(e) AM 13 Kreis(e) FM
- Wellenbereiche
- Langwelle, Mittelwelle, Kurzwelle und UKW.
- Betriebsart / Volt
- Wechselstromspeisung / 110-240 Volt
- Lautsprecher
- 4 Lautsprecher
- Belastbarkeit / Leistung
- 5.5 W (Qualität unbekannt)
- Material
- Gerät mit Holzgehäuse
- von Radiomuseum.org
- Modell: Sinfonia 4R/422 - Graetz, Altena Westfalen
- Form
- Tischgerät, Tasten oder Druckknöpfe.
- Abmessungen (BHT)
- 680 x 400 x 305 mm / 26.8 x 15.7 x 12 inch
- Bemerkung
- Schallkompressor, Ferritantenne; Mag. Auge abschaltbar. Nahezu identisch mit Sinfonia 422. Bandbreite schaltbar.
- Nettogewicht
- 16 kg / 35 lb 3.9 oz (35.242 lb)
- Autor
- Modellseite von Gottfried Silberhorn angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.
- Weitere Modelle
-
Hier finden Sie 778 Modelle, davon 698 mit Bildern und 596 mit Schaltbildern.
Alle gelisteten Radios usw. von Graetz, Altena (Westfalen)
Sammlungen
Das Modell Sinfonia befindet sich in den Sammlungen folgender Mitglieder.
Forumsbeiträge zum Modell: Graetz, Altena: Sinfonia 4R/422
Threads: 2 | Posts: 7
Hello,
One of my hobby's is restoring Graetz Radio's from the years around 1955.
They are so well build and nice to restore. Right now I am busy with a Sinfonia 4R/422. Radio has a problem I would like your advice. The Radio scale on the FM is compressed and does not match the scale description anymore. Normally the FM scale runs from 88-100Mhz but on this Radio (and I have seen it 3 times before) the scale runs from 88 to+-107Mhz. The Radio was not modified at all before, it came with a pile of dust of 55 years. I noticed that if I turn C24 Capacitor there is no effect at all. Normally it would bring the scale in sync with the needle. Also tried to replace C27 and C26 but without success. Now before I replace all without success I wonder if one of you do know a solution for this problem.
Thanks and with Graetz greetings!
Sierd Dijkstra
Sierd Dijkstra, 29.Mar.11
Ich habe ein Gerät (Chassis Nr. 329/56) mit der Rückwandbeschriftung "Sinfonia 4R/422 RAUMKLANG-SPITZENSUPER" und mit Logo und Kennzeichnung "Schallkompressor" auf dem Skalenglas. Es sieht nicht nach ersetzten Teilen aus.
Bernward Felbermair, 22.Jul.10