- País
- Alemania
- Fabricante / Marca
- Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Año
- 1955
- Categoría
- Radio - o Sintonizador pasado WW2
- Radiomuseum.org ID
- 75689
-
- alternative name: Grundig Portugal || Grundig USA / Lextronix
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 5
- Numero de transistores
- Semiconductores
- B250C75
- Principio principal
- Superheterodino en general; ZF/IF 468 kHz; 2 Etapas de AF; Modelo de Exportacion
- Número de circuitos sintonía
- 6 Circuíto(s) AM
- Gama de ondas
- OM y más de dos OC
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 110, 125, 150, 225 Volt
- Altavoz
- Altavoz elíptico de imán permanente. / Ø 17 cm = 6.7 inch
- Material
- Bakelita
- de Radiomuseum.org
- Modelo: 2045WZX - Grundig Radio-Vertrieb, RVF,
- Forma
- Sobremesa de botonera.
- Ancho, altura, profundidad
- 552 x 360 x 238 mm / 21.7 x 14.2 x 9.4 inch
- Anotaciones
- Tropicalized, fly-wheel tuning, separately variable bass and treble, controls with visual indications on scale; sockets provided for gramophone pick-up connection and extension loudspeaker. To 6 volt car battery by means of additional vibrator, automatic switch by connection of the vibrator. Rectifier: one metal. SWI: 2-6 MHz SWII: 5,9- 11,5 MHz, SWIII: 11,3-17,5 MHz, SWIV: 17,3-26,5 MHz
- Procedencia de los datos
- -- Original prospect or advert
- Documentación / Esquemas (1)
- -- Original-techn. papers.
- Autor
- Modelo creado por Carlos A. Pieroni-García. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 6212 modelos, 5442 con imágenes y 4209 con esquemas.
Ir al listado general de Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
Contribuciones en el Foro acerca de este modelo: Grundig Radio-: 2045WZX
Hilos: 1 | Mensajes: 2
i have studied the schematic for the grundig 2045WZX, and i noticed that the unearthed lead of the filament of the em85 magic eye tube is not connected to the 6.3 volt ac supply, but rather it is connected to one of the leads of the high voltage winding of the power transformer. i cannot believe this could be correct, as it would place a high voltage across the filament which would destroy it instantly.
my question: is the connection i refer to above correct?
i ask the question as i have recently acquired a grundig 2054WZX radio which is missing its power transformer and i plan to restore it.
regards
basim bulos
Basim Bulos, 16.Feb.10