• Année
  • 1956 ?
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 98150
    • alternative name: Grundig Portugal || Grundig USA / Lextronix

Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.

 Spécifications techniques

  • No. de tubes
  • 9
  • Principe général
  • Super hétérodyne (en général); FI/IF 468/10700 kHz; Modèle pour exporter
  • Circuits accordés
  • 8 Circuits MA (AM)     13 Circuits MF (FM)
  • Gammes d'ondes
  • PO, 2 x OC et FM
  • Particularités
  • Télécommande par HF ou fil
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110/220 Volt
  • Haut-parleur
  • 4 HP
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Majestic 4095USA - Grundig Radio-Vertrieb, RVF,
  • Forme
  • Modèle de table avec boutons poussoirs.
  • Dimensions (LHP)
  • 680 x 330 x 360 mm / 26.8 x 13 x 14.2 inch
  • Remarques
  • Connectors for Grundig Majestic Acousticon and Baton.

    See also the German domestic model Konzertgerät 4095

  • Poids net
  • 16.8 kg / 37 lb 0.1 oz (37.004 lb)
  • Auteur
  • Modèle crée par Georg Richter. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum

Contributions du forum pour ce modèle: Grundig Radio-: Majestic 4095USA

Discussions: 2 | Publications: 7

I bought a Grundig Majestic 4095 because I've been fond of the tube sound and thought the cabinet was attractive.

This is my first radio project.

Went to clean it and the tuner wires came off the pulleys. 

Would anyone know where to find a schematic for stringing these wire?

Please, if you have any guidance, it will be greatly appreciated.

Thanks,

Alan

Alan Schneider, 10.Mar.20

Weitere Posts (4) zu diesem Thema.

( Posted with kind permission of Jeff S., Boulder, Colorado, USA.
  Thank you very much, Jeff. )

I just completed my first table radio restoration and I'm psyched at how good this 50 year old is working!

Exterior was in pretty good shape, but some veneer needed to be reglued and the shellac(?) was looking a bit tired, so I lightly sanded the cabinet with #600 sandpaper and applied a light coat of linseed oil.

Set has been slightly modified to accept a new Russian magic eye:



Interior after restoration:



Underside showing new Orange Drops:

Multisection capacitor is actually just the shell of the old capacitor fitted over a new F&T chassis mount part from askjanfirst.com.

Had to enlarge the existing hole about 3mm to accomodate the stud-mounted part. Big black caps to the lower left are 4 uf and 10 uf Solen polypropylenes.

Just two electrolytic caps left in this radio!

Just some of the parts I replaced; all but one of the vacuum tubes
tested bad; fortunately I had purchased a full set of tubes from Jan
beforehand:



Original AEG selenium rectifier can restuffed with silicon rectifiers +
snubber capacitors:



I briefly thought about using all German-made caps and resistors, but
quickly decided those weren't likely to look any more "vintage" than the orange drops. Nevertheless, there's the new F&T can, plus a few
Roederstein and Electrica parts in there.

By the way, what kind of wood is this made of?

( If you have the answer please email the underassistant auxiliary poster
of Jeffs report )


Jeff in Colorado

Georg Richter, 01.Jun.06

Weitere Posts (3) zu diesem Thema.