Majestic Stereo Console SO160 Ua
Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Hersteller / Marke
- Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Jahr
- 1960/1961
- Kategorie
- Rundfunkempfänger (Radio - oder Tuner nach WW2)
- Radiomuseum.org ID
- 211229
-
- anderer Name: Grundig Portugal || Grundig USA / Lextronix
Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.
- Anzahl Röhren
- 12
- Anzahl Transistoren
- Halbleiter
- B250C150
- Hauptprinzip
- Superhet allgemein
- Spezialitäten
- Plattenwechsler
- Betriebsart / Volt
- Wechselstromspeisung
- Lautsprecher
- 5 Lautsprecher
- Material
- Gerät mit Holzgehäuse
- von Radiomuseum.org
- Modell: Majestic Stereo Console SO160 Ua - Grundig Radio-Vertrieb, RVF,
- Form
- Standgerät: allgemein.
- Abmessungen (BHT)
- 45 x 32.5 x 17 inch / 1143 x 826 x 432 mm
- Bemerkung
-
US export model. Available in Wood or Hi-Gloss finishes. See also domestic model SO160.
Data taken from "Billboard" magazine. We are not certain about the type suffix, it could be SO160U or SO160US.Suffix type is SO160Ua, per photo of label.
- Originalpreis
- 520.00 $
- Literaturnachweis
- Billboard Feb. 1961
- Weitere Modelle
-
Hier finden Sie 6208 Modelle, davon 5434 mit Bildern und 4203 mit Schaltbildern.
Alle gelisteten Radios usw. von Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
Sammlungen
Das Modell Majestic Stereo Console befindet sich in den Sammlungen folgender Mitglieder.
Forumsbeiträge zum Modell: Grundig Radio-: Majestic Stereo Console SO160 Ua
Threads: 3 | Posts: 7
Can anyone produce a better scan of this schematic? The text on this one is mostly unreadable. The SO160 domestic model has significant differences. Thanks.
Simon Favre, 10.May.23
I've recapped my console by reading the values from the old caps and replacing with the appropriate modern version.
In all of the restorations that I've done, I've never seen a Grundig schematic that has a voltage listed on greater than 300V following the rectifier so when I measured 330V, I tried to check things to see what the possible issue was.
I replaced the rectifier and measured 270V at the DC output side with nothing connected to it. As soon as I reconnected the rest of the electronics to the DC output side, the voltage jumps back to 330V.
I have replaced a number of the tubes, but since I don't have the schematics, I am struggling to figure out where the problem is. Any guidance of what to look at it appreciated!
craig.
Craig Vodnik, 23.Sep.17
I have a Grundig SO 160ua that I am working on for a friend. I realized that the schematics listed for the SO 160 are not the same as for the SO 160ua, unless I'm doing something very wrong.
On the schematics for the 160, there is no EABC 80 tube and there's an EBF 89 but not an EF 89, as you can see from the tube location plan below.
Does anyone have the schematic or know what the difference is?
Craig Vodnik, 23.Sep.17