• Anno
  • 1965
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 107361
    • alternative name: Grundig Portugal || Grundig USA / Lextronix

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Numero di transistor
  • 10
  • Gamme d'onda
  • Gamme d'onda nelle note.
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 110; 220 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Stereo-Coder SC1 - Grundig Radio-Vertrieb, RVF,
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 300 x 215 x 190 mm / 11.8 x 8.5 x 7.5 inch
  • Annotazioni
  • Grundig Service Stereo Coder SC-1 bringt einen FM modulierter HF-Träger ca. 1 mV an 60 Ohm; 98 MHz ca. 250 kHz verstellbar. Beschreibung in "Grundig Technische Informationen" vom September 1965 (Autor: H. Weglehner) - ab Seite 935 inkl. Schema.
  • Peso netto
  • 4 kg / 8 lb 13 oz (8.811 lb)
  • Prezzo nel primo anno
  • 5,485.00 BFr
  • Bibliografia
  • -- Original prospect or advert
  • Autore
  • Modello inviato da Hugo Sneyers. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Stereo-Coder fa parte delle collezioni dei seguenti membri.

Letteratura

Il modello Stereo-Coder è documentato nella seguente letteratura.

 Forum

Discussioni nel forum su questo modello: Grundig Radio-: Stereo-Coder SC1

Argomenti: 1 | Articoli: 5

Hi !

I've bought one of these coders.

It does not function (powers up but no correct signal).

with it came a paper from "Grundig Technishe Informationen"  Sepember 1965 written by Mr H. WEGLEHNER and titlet "Grundig Service Stereo Coder SC-1". I've 6 A4 pages plus 2 for the schematics starting at page 935.

Questions :

1) Do you think they're valuable enough to be uploaded to the site ?

2) If the answer to the above quesiton is yes, and as they contain pictures of actual oscillograms, they need to be scanned at a higher resolutions than the schematics. How could i do this ?

3) I would be greatly pleased to get the same version of this paper in a language I understood : English or better French. So if someone has another source I would be gratefull to get a copy ! It would greatly help fixing it by knowing what buttons do and what to expect from the unit.

Regards

Georges Giralt, 07.Dec.08

Weitere Posts (5) zu diesem Thema.