Stereo Console SO162US
Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Country
- Germany
- Manufacturer / Brand
- Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
- Year
- 1959/1960
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 120797
-
- alternative name: Grundig Portugal || Grundig USA / Lextronix
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 13
- Main principle
- Superheterodyne (common)
- Tuned circuits
- 7 AM circuit(s) 10 FM circuit(s)
- Wave bands
- Broadcast, 2 Short Wave plus FM or UHF.
- Details
- Changer (Record changer)
- Power type and voltage
- Alternating Current supply (AC) / 110; 125; 220 Volt
- Loudspeaker
- 4 Loudspeakers
- Material
- Wooden case
- from Radiomuseum.org
- Model: Stereo Console SO162US - Grundig Radio-Vertrieb, RVF,
- Shape
- Console with Push Buttons.
- Dimensions (WHD)
- 1380 x 820 x 440 mm / 54.3 x 32.3 x 17.3 inch
- Notes
- Phono-Chassis = ELAC PW9. The Grundig Stereo Console SO 162 US (SO162US) is the export version to America of the model SO162 or SO 162/60 and/or the SO162WE.
- External source of data
- Laurence W. Stewart, USA
- Author
- Model page created by Ernst Erb. See "Data change" for further contributors.
- Other Models
-
Here you find 6208 models, 5434 with images and 4203 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Grundig (Radio-Vertrieb, RVF, Radiowerke); Fürth/Bayern
Collections
The model Stereo Console is part of the collections of the following members.
Forum contributions about this model: Grundig Radio-: Stereo Console SO162US
Threads: 1 | Posts: 10
I wanted to ask about a problem I am having with my unit, I wanted to see if others have experienced the same or if I really have a problem. My unit works but seems to be a little "hot" when in FM mode. What I mean by this is that the EM84 indicator tube goes full scale on almost any FM station that can be recieved. This does not happen on AM. The most obvious problem compared to the print is that the plate of the EBC41 tube has 76v when in FM and it should only have 34v. The AM and PU voltage readings are correct.
Could this have anything to do with the changes in FM broadcast standards since this unit was built? If I really do have a problem could someone maybe point me in a likely direction? This tuner is just too sophisticsted for me to analyze and narrow down a fault.
I should add that the unit has been recapped and the problem is not any of the tubes.
Thankyou, Brad.
Attachments
- schematic (120 KB)
Bradley Beaty, 14.Apr.08