100 kW Medium Wave Broadcast Transmitter VP -100A
Harris Corporation; Melbourne, Florida
- País
- Estados Unidos
- Fabricante / Marca
- Harris Corporation; Melbourne, Florida
- Año
- 1976 ?
- Categoría
- Transmisor comercial (TX no transceptor)
- Radiomuseum.org ID
- 328900
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 5
- Válvulas
- 4CV100,000C 4CV100,000C 4CX1500A 4CX1500A 2CX10,000F
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Principio principal
- Transmitter
- Gama de ondas
- OM (onda media) solamente
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 3 Phase 50 or 60 Hz, 380 - 480 Volt
- Material
- Metálico
- de Radiomuseum.org
- Modelo: 100 kW Medium Wave Broadcast Transmitter VP -100A - Harris Corporation; Melbourne,
- Forma
- Rack
- Anotaciones
-
100 kW Medium Wave Broadcast Transmitter
Features:
- Overall efficiency better than 65%
- Exclusive Pulse Duration Modulator [PDM] for high level plate modulation
- Redundancy in solid state circuits
- Continuous 100% modulation rating
- Vapor phase cooling for quiet operation and extended tube life
- Only five tubes, with three tube types
- Designed for a wide climate range
Specifications:
POWER OUTPUT: 100,000 watts nominal unmodulated, capable 110,000 watts. RF FREQUENCY RANGE: 535 kHz to 1620 kHz. RF OUTPUT IMPEDANCE: 230 ohms, unbalanced. RF FREQUENCY STABILITY: ± 5 Hz. SPURIOUS AND HARMONIC EMISSION: Less than 50 mW. CARRIER SHIFT: Less than 5% at 100% modulation at 1,000 Hz. AUDIO FREQUENCY RESPONSE: ± 1.5 dB from 40 to 10,000 Hz, referenced to 1 kHz at 95% mod. AUDIO FREQUENCY DISTORTION: Less than 3% from 40 to 10,000 Hz, at 95% mod. NOISE: 55dB below 100% modulation at 1,000 Hz. AUDIO INPUT LEVEL: 10 dBm ± 2 dB for 100% modulation. AUDIO INPUT IMPEDANCE: 600/150 Ω, balanced or unbalanced. MODULATION LEVEL: 100% sinusoidal, continuous, 50 to 5,000 Hz. TRAPEZOIDAL MODULATION: Less than 5% tilt or over- shoot, 100 Hz to 2,000 Hz. Comprises two cabinets 1.83 meters (6 feet) wide, 1.37 meters (4.5 feet) deep, and 1.98 meters (6.5 feet) high. The heat exchanger adds another 1.07 meters (3.5 feet) in height.
- Mencionado en
- - - Manufacturers Literature (Harris Radio Transmitter & Accessories, Broadcast Products Division of Harris Corp. 1976)
- Autor
- Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 4 modelos, 3 con imágenes y 1 con esquemas.
Ir al listado general de Harris Corporation; Melbourne, Florida