50 kW Medium Wave Broadcast Transmitter MW-50
Harris Corporation; Melbourne, Florida
- País
- Estados Unidos
- Fabricante / Marca
- Harris Corporation; Melbourne, Florida
- Año
- 1976 ?
- Categoría
- Transmisor comercial (TX no transceptor)
- Radiomuseum.org ID
- 328901
- Numero de valvulas
- 5
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Principio principal
- Transmitter
- Gama de ondas
- OM (onda media) solamente
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 3 Phase 50 or 60 Hz, 380 V - 480 Volt
- Material
- Metálico
- de Radiomuseum.org
- Modelo: 50 kW Medium Wave Broadcast Transmitter MW-50 - Harris Corporation; Melbourne,
- Forma
- Rack
- Ancho, altura, profundidad
- 144 x 78 x 48 inch / 3658 x 1981 x 1219 mm
- Anotaciones
-
50 kW Medium Wave Broadcast Transmitter
Features:
- High level plate modulated, using a Pulse Duration Modulator [PDM]
- High overall efficiency... exceeds 60%
- Minimum power consumption, only 87 kW at 30% modulation
- Only five tubes, with three tube types
- Only one power amplifier tube and one modulator tube
- Quiet, air -cooled operation
- Compact design
- High level design with no modulation transformer or reactor
- Power level is adjusted in low level PDM stage. No loading adjustment is required
- Switches smoothly from high to low power with. Carrier on
- Automatic return to operation after a power failure
- Easily remote controlled
Specifications:
POWER OUTPUT: 50,000 watts (rated), 60,000 watts (capable).
Convenient power reduction to 25,000 or 10,000 watts.RF FREQUENCY RANGE: 535 kHz to 1620 kHz. RF OUTPUT IMPEDANCE: 50 Ω, unbalanced. RF FREQUENCY STABILITY: ± 5 Hz. RF HARMONICS: Exceeds FCC and CCIR specifications. CARRIER SHIFT: Less than 2% at 100% modulation at 1,000 Hz. AUDIO FREQUENCY RESPONSE: ± 1.5 dB from 20 to 10,000 Hz, referenced to 10 kHz at 95% mod. AUDIO FREQUENCY DISTORTION: Less than 3% from 40 to 10,000 Hz, at 95% mod. NOISE: (Unweighted) -60 dB or better below 100% modulation. AUDIO INPUT LEVEL: 10 dBm ± 2 dB for 100% modulation. AUDIO INPUT IMPEDANCE: 600/150 Ω, balanced or unbalanced. MODULATION LEVEL: 100% sinusoidal, continuous, 50 to 5,000 Hz. The unknown rectifier is a F-1099 damper diode but I can find no specs for it.
- Peso neto
- 5000 lb (5000 lb 0 oz) / 2270 kg
- Mencionado en
- - - Manufacturers Literature (Harris Radio Transmitter & Accessories, Broadcast Products Division of Harris Corp. 1976)
- Autor
- Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 4 modelos, 3 con imágenes y 1 con esquemas.
Ir al listado general de Harris Corporation; Melbourne, Florida