Dynamic Signal Analyzer 3561A

Hewlett-Packard, (HP); Palo Alto, CA

  • Année
  • 1984
  • Catégorie
  • Appareils de mesure et de dépannage (matériel de labo)
  • Radiomuseum.org ID
  • 213513

 Spécifications techniques

  • No. de tubes
  • 1
  • Lampes / Tubes
  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Gammes d'ondes
  • - sans
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 110; 120; 220; 240 Volt
  • Haut-parleur
  • - - Pas de sortie basse fréquence
  • Matière
  • Boitier métallique
  • De Radiomuseum.org
  • Modèle: Dynamic Signal Analyzer 3561A - Hewlett-Packard, HP; Palo Alto
  • Forme
  • Modèle de table profil bas (grand modèle).
  • Dimensions (LHP)
  • 335 x 197 x 595 mm / 13.2 x 7.8 x 23.4 inch
  • Remarques
  • The -hp- Model 3561A is a single channel Fast Fourier Transform (FFT) signal analyzer covering the frequency range to 100 kHz. The measurement capabilities include magnitude, phase, and time displays in a narrow band, 1/3 octave, or full octave format. Resolution in the narrow band mode ranges from 25.6 µHz to 250 Hz. Input signals range from +27 dBV down to -51 dBV with a dynamic range of 80 dB.
    Application: measurement and analysis of low-frequency waveforms in electronic, acoustic, and vibration applications. Besides spectral analysis, it can perform network measurements and time domain waveform recording.
    Other features: - rms averaging - rms exponential averaging - time averaging - math operations - power computation in a frequency band - analysis of modulation sidebands - setup and display storage - variable source of noise or impulse - A-weighting filter - remote programming (HP-IB)

    Option 001: Bubble Memory
    Operating Manual and Service Manual(Part I): www.agilent.com
    Comprehensive article: HP Journal December 1984


    Das -hp- Model 3561A ist ein einkanaliger Signalanalysator mit Fast Fourier Transformation (FFT), der den Frequenzbereich bis 100 kHz abdeckt. Er kann Betrag, Phase und Zeitverlauf darstellen, in Schmalband, 1/3 Oktave oder Ganzoktavenformat. Die Auflösung reicht von 25,6 µHz im Schmalbandformat bis zu 250 Hz. Der Signaleingangsbereich reicht von +27 dBV bis -51 dBV mit einem Dynamikberich von 80 dB.
    Anwendungen: Messung und Analyse von niederfrequenten Schwingungen in der Elektronik, Akustik und Vibrationsmechanik. Außer Spektralanalyse sind Netzwerkmessungen sind Aufzeichnungen im Zeitbereich möglich.
    Andere Eigenschaften: - Effektiv-Echtwert-(Exponential-)Mittelwertbildung - Zeit Mittelwertbildung - Mathematische Funktionen - Leistungsberechnung im Frequenzband - Analyse von Modulationsseitenbändern - Einstellungs- und Signalformspeicher - Variable Rausch-/Impuls-Quelle - A-Gewichtungsfilter - Fernbedienung (HP-IB)

    Option 001: Bubble Memory (Speichererweiterung)
    Bedienungsanleitung und Serviceanleitung (Teil I): www.agilent.com
    Ausführliche Beschreibung: HP Journal Dezember 1984
  • Poids net
  • 15 kg / 33 lb 0.6 oz (33.04 lb)
  • Source
  • -- Original-techn. papers.
  • Littérature
  • HP Journal Vol. 35, No. 12, December 1984
  • Auteur
  • Modèle crée par Rudi Barth. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

Collections

Le modèle Dynamic Signal Analyzer fait partie des collections des membres suivants.

 Forum