• Anno
  • 1968
  • Categoria
  • Strumento da laboratorio
  • Radiomuseum.org ID
  • 340609

Clicca sulla miniatura dello schema per richiederlo come documento gratuito.

 Specifiche tecniche

  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Alimentazione a corrente alternata (CA) / 115/230 Volt
  • Altoparlante
  • - - Nessuna uscita audio.
  • Materiali
  • Mobile di metallo
  • Radiomuseum.org
  • Modello: Milliohmmeter 4328A - Hewlett-Packard, HP; Palo Alto
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 130 x 155 x 279 mm / 5.1 x 6.1 x 11 inch
  • Annotazioni
  • The HP 4328A Milliohmmeter has the following features:

    • Uses Kelvin Bridge method (4-wire: I+, I-, V+, V-).
    • Range: 0.001 to 100 Ω full scale, in a 1, 3, 10 sequence.
    • Accuracy: +/-2% of full scale.
    • Maximum Sensitivity: 20 uΩ.
    • Circuit measurement uses a 1 kHz ac drive signal; allows up to 150 VDC bias without affecting the accuracy.
    • Maximum voltage across the unit-under-test (UUT) is 20mV peak, which allows explosive devices such as fuses and squibs to be safely tested.
    • Option 01 is a 4-rechargable battery pack for 15 continuous hours of battery operation ($25).
  • Peso netto
  • 3.2 kg / 7 lb 0.8 oz (7.048 lb)
  • Prezzo nel primo anno
  • 450.00 USD
  • Letteratura / Schemi (1)
  • -- Original-techn. papers.
  • Letteratura / Schemi (2)
  • 1968 Hewlett-Packard Instrumentation Electronic Analytical Medical catalog, page 218
  • Autore
  • Modello inviato da Otto Hauser. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Milliohmmeter fa parte delle collezioni dei seguenti membri.

 Forum

Discussioni nel forum su questo modello: Hewlett-Packard, HP;: Milliohmmeter 4328A

Argomenti: 1 | Articoli: 2

1. Wer kennt dieses Gerät? Bei der letzten Verwendung des Milliohmmeters war die Funktion einwandfrei, nun, ein Jahr später kein Ausschlag des Messzeigers. Spannungen sind vorhanden, allerdings häufig nicht jene gemäss Servicemanual. Mein Verdacht, Alterung von Kondensatoren, besonders Tantals. Mit Komponenttester Funktion des Oszilloskops Aufnahme von Oszillogrammen, im eingabauten Zustand, jedoch bei stromlosem Gerät. Als Anfänger weiss ich nicht, ob damit Aussage möglich, ob auf diese Weise defekte Kondensatoren erkannt werden können.
Um Tipps bin ich sehr dankbar
Danke im voraus.
Freundliche Grüsse
Otto Hauser

Otto Hauser, 07.Oct.22

Weitere Posts (2) zu diesem Thema.