Network Analyzer 8754A
Hewlett-Packard, (HP); Palo Alto, CA
- País
- Estados Unidos
- Fabricante / Marca
- Hewlett-Packard, (HP); Palo Alto, CA
- Año
- 1984
- Categoría
- Aparato de medida y servicio (Equipo de laboratorio).
- Radiomuseum.org ID
- 252638
- Numero de transistores
- Hay semiconductores.
- Semiconductores
- Tensión de funcionamiento
- Red: Corriente alterna (CA, Inglés = AC) / 100;120;220;240 Volt
- Material
- Metálico
- de Radiomuseum.org
- Modelo: Network Analyzer 8754A - Hewlett-Packard, HP; Palo Alto
- Forma
- Sobremesa apaisado (tamaño grande).
- Ancho, altura, profundidad
- 425 x 133 x 505 mm / 16.7 x 5.2 x 19.9 inch
- Anotaciones
-
The 8754A Network Analyzer consists of an internally leveled 4 to 1300 MHz swept source with crystal markers, a three input tuned receiver with two independent measurement channels, and a CRT display with rectangular and polar graticules. Together with appropriate signal separation accessories, the 8754Ais a complete stimulus/response test system that measures magnitude and phase characteristics of linear networks by comparing the incident signal with the signal transmitted by the device or reflected from its input.
The basic transmission measurements are: insertion loss or gain, insertion phase, and transmission coefficient, S21 or S12. Basic reflection measurements are: return loss, from which SWR can be calculated, and reflection coefficient, S11 or 22'from which impedance can be calculated or read from a Smith Chart overlay.
- Peso neto
- 17.7 kg / 38 lb 15.8 oz (38.987 lb)
- Mencionado en
- - - Manufacturers Literature
- Autor
- Modelo creado por Antonio Marra. Ver en "Modificar Ficha" los participantes posteriores.
- Otros modelos
-
Donde encontrará 393 modelos, 361 con imágenes y 138 con esquemas.
Ir al listado general de Hewlett-Packard, (HP); Palo Alto, CA
Colecciones
El modelo Network Analyzer es parte de las colecciones de los siguientes miembros.