• Jahr
  • 1959
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 128161

Klicken Sie auf den Schaltplanausschnitt, um diesen kostenlos als Dokument anzufordern.

 Technische Daten

  • Anzahl Röhren
  • 25
  • Anzahl Transistoren
  • 2
  • Halbleiter
  • Wellenbereiche
  • - ohne
  • Betriebsart / Volt
  • Wechselstromspeisung / 115; 230 Volt
  • Lautsprecher
  • - - Kein Ausgang für Schallwiedergabe.
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Oscilloscope 122A/AR - Hewlett-Packard, HP; Palo Alto
  • Form
  • Tischgerät, Hochformat (höher als quadratisch, schlicht, keine Kathedrale).
  • Abmessungen (BHT)
  • 248 x 310 x 540 mm / 9.8 x 12.2 x 21.3 inch
  • Bemerkung
  • The Hewlett-Packard Model 122A/AR is a dc to 200 kHz (kilocycle) dual-trace cathode-ray oscilloscope. It has accurately calibrated input sensitivity and sweep speed ranges. This oscilloscope features dc-coupled differential amplifiers and dual trace operation. Differential amplifiers are useful since they reject the common mode (in-phase) part of the input while amplifying the differential (out-of-phase) part.
    Some tube-types are used repeatedly. Transistors: CTP1113; 2N383.

    Sensitivity from 10 mV/cm to 100 V/cm.
    Sweep in 15 ranges from 5 µsec/cm to 0.5 sec/cm.
    122A for portable use, 122AR for cabinet installation.

  • Nettogewicht
  • 15.8 kg / 34 lb 12.8 oz (34.802 lb)
  • Originalpreis
  • 725.00 $
  • Datenherkunft
  • - - Manufacturers Literature
  • Literaturnachweis
  • - - Data from my own collection
  • Literatur/Schema (1)
  • -- Original prospect or advert (L'Elettrotecnica, magazine of AEI Italy, December 1958)
  • Autor
  • Modellseite von Sven Hoffmann angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

Sammlungen

Das Modell Oscilloscope befindet sich in den Sammlungen folgender Mitglieder.

 Forum