Ball Drive Dial 4489/C

Jackson Bros. (London) Ltd.; Croydon

  • Año
  • 1960 ??
  • Categoría
  • Pieza de radio (no módulo)
  • Radiomuseum.org ID
  • 356156

 Especificaciones técnicas

  • Gama de ondas
  • - no hay
  • Tensión de funcionamiento
  • No necesita alimentación
  • Altavoz
  • - - No hay salida de sonido.
  • Material
  • Materiales diversos
  • de Radiomuseum.org
  • Modelo: Ball Drive Dial 4489/C - Jackson Bros. London Ltd.;
  • Forma
  • Chasis (tambien de autoradio)
  • Ancho, altura, profundidad
  • 4 x 4 x 1.4 inch / 102 x 102 x 36 mm
  • Anotaciones
  • The Jackson Bros ball drive dial has a 4" diameter reversible aluminium scale that is printed 0-100 over 180˚ on one side. The other side is left blank for the customer to engrave.

    The brass friction drive mechanism, which has a reduction ratio of about 6:1, is mainly housed inside the plastic knob. The whole assembly is mounted on the 1/4" shaft of the component and only one other hole (for the anchor pin) is required in the panel. There is sufficient clearance between the drive mechanism and the panel for a component fixing nut or screws.

  • Peso neto
  • 0.150 kg / 0 lb 5.3 oz (0.33 lb)
  • Mencionado en
  • - - Manufacturers Literature (Manufacturer's specification and fitting instructions.)
  • Autor
  • Modelo creado por Bruce Taylor. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Ball Drive Dial es parte de las colecciones de los siguientes miembros.

 Forum