Fm-Am 4 Channel Stereo Receiver 4VR-5456X

JVC - Victor Company of Japan, Ltd.; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1973–1977 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 148664

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common); ZF/IF 455/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 120; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 200 W (undistorted)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Fm-Am 4 Channel Stereo Receiver 4VR-5456X - JVC - Victor Company of Japan,
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 513 x 180 x 405 mm / 20.2 x 7.1 x 15.9 inch
  • Notes

  • An AC mains receiver with an AM/FM stereo tuner and a quadrophonic amplifier with output power of 4 x 43 watts RMS or 2 x 100 watts RMS into 8 ohms. With built-in CD-4 demodulator for 4 channel phono cartridge and tape and with a Det Out connection for an FM 4 channel broadcast demodulator and connections for FM 4 channel input. With JVC's S.E.A. (Sound Effect Amplifier) tone control system. Optional JVC 5911 Remote Balance Control (joystick). 

    Specification  
    FM Tuner Section  
    Tuning range  88 - 108MHz
    Usable sensitivity 1.8µV (IHF)
    THD Mono 0.3%, Stereo 0.4%
    S/N Ratio 65dB (at 15µV)
    Selectivity 65dB (IHF)
    AM Tuner Section  
    Tuning range 525 - 1605kHz
    Usable sensitivity 30µV, 200µV/m
    Selectivity 30dB
    Audio Section  
    RMS power all channels driven
    20Hz-20kHz  at 8Ω / 4Ω    		 43W per Channel / 50W per Channel
    BTL (Bridge Tied Load) at 8Ω 100W x 2
    Total dynamic power at 8Ω  /  4Ω 280W / 400W
    IHF power bandwidth 5Hz - 45kHz
    Total Harmonic Distortion 0.5%
    IM distortion 0.8%
    Frequency response 10Hz - 50kHz ±1dB
    Load impedance (4-channel) 4 - 16Ω
    Damping factor 40 at 8Ω
    Input Sensitivity / Impedance/ S/N ratio
     for rated power    		  
    Phono (low) 3mV / 100kΩ / 70dB
    Phono (high) 1.5mV / 100kΩ / 65dB
    Aux-1, Aux-2 150mV / 50Ω / 75dB
    Tape Mon-1, Mon-2 150mV / 50Ω / 75dB
    FM 4 channel input 150mV / 50Ω / 75dB
    Recording Output  
    Tape Rec. 150mV
    Frequency Response 10Hz - 50kHz ±1dB

    AM/FM-Quadrofonie/Stereo-Receiver mit CD-4, S.E.A., BTL.
    4 x 64 Watt Sinus an 4 Ohm.
    5-Band-Equalizer.

  • Net weight (2.2 lb = 1 kg)
  • 20 kg / 44 lb 0.8 oz (44.053 lb)
  • Source of data
  • -- Original prospect or advert
  • Literature/Schematics (1)
  • - - Manufacturers Literature (1977 JVC HiFi-Katalog)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Instruction Book JVC 4VR-5456X 4 Channel Receiver)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum