Fm-Am 4 Channel Stereo Receiver 4VR-5446X

JVC - Victor Company of Japan, Ltd.; Tokyo

  • Année
  • 1973 ?
  • Catégorie
  • Radio - ou tuner d'après la guerre 1939-45
  • Radiomuseum.org ID
  • 333230

 Spécifications techniques

  • No. de transistors
  • Semi-conducteurs présents
  • Semi-conducteurs
  • Principe général
  • FI/IF 455/10700 kHz
  • Gammes d'ondes
  • PO et FM
  • Particularités
  • Equipement HIFI
  • Tension / type courant
  • Alimentation Courant Alternatif (CA) / 100; 120; 220; 240 Volt
  • Haut-parleur
  • - Ce modèle nécessite des HP externes
  • Puissance de sortie
  • 110 W (sans distorsion)
  • Matière
  • Boitier en bois
  • De Radiomuseum.org
  • Modèle: Fm-Am 4 Channel Stereo Receiver 4VR-5446X - JVC - Victor Company of Japan,
  • Forme
  • Appareil d'étagère
  • Dimensions (LHP)
  • 20 x 6.375 x 15.375 inch / 508 x 162 x 391 mm
  • Remarques
  • An AC mains receiver with an AM/FM stereo tuner and a quadrophonic amplifier with output power of 4 x 21 watts RMS or 2 x 55 watts RMS into 8 ohms. With built-in CD-4 demodulator for 4 channel phono cartridge and tape and with a Det Out connection for an FM 4 channel broadcast demodulator and connections for FM 4 channel input. Optional JVC 5911 Remote Balance Control (joystick).

    Specification  
    FM Tuner Section  
    Tuning range  88 - 108MHz
    Usable sensitivity 2.0µV (IHF)
    THD Mono 0.5%, Stereo 0.8%
    S/N Ratio 65dB
    Selectivity 65dB
    AM Tuner Section  
    Tuning range 520 - 1605kHz
    Usable sensitivity 30µV, 200µV/m
    Selectivity 30dB
    Audio Section  
    RMS power all channels driven
    20Hz-20kHz  at 8Ω / 4Ω
    21W per Channel / 23W per Channel
    Bridge Tied Load at 8Ω 55W x 2
    Total dynamic power at 8Ω  /  4Ω 172W / 200W
    IHF power bandwidth 10Hz - 30kHz
    Total Harmonic Distortion 0.5%
    IM distortion 0.8%
    Frequency response 10Hz - 30kHz ±1dB
    Load impedance (4-channel) 4 - 16Ω
    Damping factor 30 at 8Ω
    Input Sensitivity / Impedance/ S/N ratio
     for rated power
     
    Phono (low) 3mV / 100kΩ / 70dB
    Phono (high) 1.5mV / 100kΩ / 65dB
    Aux-1, Aux-2 200mV / 50Ω / 75dB
    Tape Mon-1, Mon-2 200mV / 50Ω / 75dB
    FM 4 channel input 200mV / 50Ω / 75dB
    Recording Output  
    Tape Rec. 200mV
    Frequency Response 10Hz - 30kHz ±1dB

    Versions/Power Requirements
    E - Europe 220V AC 50Hz
    F - Europe 220/240V AC 50Hz
    M - Canada 120V AC 50/60Hz
    A - UK & Australia 240V AC 50Hz
    P or U -  Other countries 100/120/220/240V AC 50/60Hz selectable

    Similar to the earlier JVC 4VR-5446 Fm-Am 4 Channel Receiver.

     

  • Poids net
  • 27.8 kg / 61 lb 3.7 oz (61.233 lb)
  • Schémathèque (1)
  • - - Manufacturers Literature (Service manual 4VR-5446X 4 Channel Receiver)
  • Auteur
  • Modèle crée par Howard Craven. Voir les propositions de modification pour les contributeurs supplémentaires.

 Collections | Musées | Littérature

 Forum