Stereo 30

Leak, H.J.; London

  • Año
  • 1963 ?
  • Categoría
  • Amplificador de audio o mezclador
  • Radiomuseum.org ID
  • 122439

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

 Especificaciones técnicas

  • Numero de transistores
  • 18
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 110; 117; 130; 210; 230; 250 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: Stereo 30 - Leak, H.J.; London
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 330 x 110 x 225 mm / 13 x 4.3 x 8.9 inch
  • Anotaciones
  • The Leak Stereo 30 was introduced in 1963 as Leak's first transistor amplifier. It came at a time when the audio industry was transitioning from vacuum tubes to solid-state technology. 

    Technical Specifications

    • The Stereo 30 was rated at 15 watts per channel, for a total of 30 watts (hence the name).
    • It utilized germanium transistors, the only type available at the time.
    • The amplifier featured a quasi-complementary germanium transistor output stage.

    Design and Performance

    The Stereo 30 was designed to maintain the high-fidelity stereo performance that Leak was known for, despite the switch to transistor technology. Harold Leak reportedly conducted AB tests comparing the Stereo 30 against his own valve amplifiers, with claims of "near identical results".

    Challenges and Innovations

    • Germanium transistors presented challenges, being noisy and prone to thermal runaway.
    • Leak had to source pre-matched transistors from manufacturers, grouped by gain and leakage characteristics, to ensure consistent performance.
    • The amplifier's design was so well-regarded that it was adopted by many radio and TV stations worldwide for broadcast monitoring.

    Impact and Legacy

    The Stereo 30 was a commercial success and helped make Leak's products more accessible to a wider audience. Transistors were significantly cheaper to manufacture than vacuum tubes, allowing for more competitive pricing.

    Successor: Stereo 30 Plus

    In 1969, Leak introduced the Stereo 30 Plus, which replaced the germanium transistors with silicon devices. This update took advantage of improved transistor technology, offering better performance and reliability

    “Semiconductors present”, only one channel complement listed.

  • Peso neto
  • 5 kg / 11 lb 0.2 oz (11.013 lb)
  • Mencionado en
  • - - Manufacturers Literature (Company Website)
  • Documentación / Esquemas (1)
  • -- Original prospect or advert (HiFi News Oct 2023, review Tim Jarman.)
  • Autor
  • Modelo creado por J. Virgilio Santos. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

Colecciones

El modelo Stereo es parte de las colecciones de los siguientes miembros.

 Forum