Skyscraper 3 8024
Lissen Ltd.; London and Richmond, Surrey
- Country
- Great Britain (UK)
- Manufacturer / Brand
- Lissen Ltd.; London and Richmond, Surrey
- Year
- 1932–1935
- Category
- Kit (Parts plus instruction) or building instructions only
- Radiomuseum.org ID
- 77934
From Issue 1 of Practical Wireless
- Number of Tubes
- 3
- Main principle
- TRF (Tuned-Radio-Frequency but use of regeneration unknown)
- Wave bands
- Broadcast (MW) and Long Wave.
- Power type and voltage
- Storage and/or dry batteries
- Loudspeaker
- - For headphones or amp.
- Material
- Wooden case
- from Radiomuseum.org
- Model: Skyscraper 3 8024 - Lissen Ltd.; London and
- Shape
- Tablemodel, with any shape - general.
- Dimensions (WHD)
- 16.5 x 9.5 x 9.5 inch / 419 x 241 x 241 mm
- Notes
-
This kit included the cabinet but not the Cone Speaker (likely Magnetic Reed) of the 8025
There were three versions of the kit sold
- 8013 Skyscraper 3 chassis only
- 8024 Skyscraper 3 + cabinet without speaker
- 8025 Skyscraper 3 + cabinet and speaker
At least two styles of case were on offer. There later appears to be flat top and round top Lissen upright table models with a fretwork stag on speaker grill.
The circuit may be very similar to the ready made 8073. Lissen "Economy Pentode output"
- Source of data
- Radio! Radio!
- Author
- Model page created by Konrad Birkner † 12.08.2014. See "Data change" for further contributors.
- Other Models
-
Here you find 159 models, 124 with images and 58 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Lissen Ltd.; London and Richmond, Surrey