Stereo Amplifier 3020B

A 2 x 25 watt stereo hi-fi integrated amplifier with Soft Clipping. RCA input sockets for Phono (MM or MC), Tuner and Aux, input/output RCA sockets and DIN socket for Tape, switches for MC/MM Selector, Soft Clipping (On/Off) and Speaker Impedance (8Ω/4Ω). Sockets for Pre-amp out and Normal-in fitted with removable U shaped metal jumpers, and sockets for Lab-in (an alternative to the Normal-in socket with wideband frequency response). Binding posts for one pair of loudspeakers and two AC outlets (not all models). Rotary controls for Bass, Treble, Balance and Volume, push buttons for Power, input selection (Aux, Tuner, Phono, Tape),  Mono and Loudness. Power On pilot light and and 5 LED Power Meter indicators. Jack for headphones.

Specification
Continuous Average Power Output into 8Ω
(Min. RMS power per channel, 20Hz - 20kHz, both channels driven
with no more than the rated distortion) ..:  25 watts
Rated Distortion (THD) 20Hz - 20kHz ....:  0.02%
IHF Dynamic Headroom at 8Ω .............:  +3dB
IHF Dynamic Power (Max. short term) ..:  50 W (8Ω), 55 W (4Ω), 70 W (2Ω)
Frequency Response, Lab Input ...........:  10Hz - 70kHz
Input Sensitivity ..................................:  2.7mV (MM), 180µV (MC), 180mV (line)      

Versions/Power Requirements
USA Canada   120 V AC 60Hz
Europe            220 or 240 V AC 50Hz

Similar to the NAD 3120 Stereo Amplifier which has no tone controls or LEDs. Same circuit design as the earlier 2 x 20 watt NAD 3020 Series 20 Stereo Amplifier.

Made in Taiwan

Vous pourrez trouver sous ce lien 120 modèles d'appareils, 118 avec des images et 25 avec des schémas.
Tous les appareils de NAD, New Acoustic Dimension; Ontario