Microphone Bar Amplifier

New Wilson Electrical , London

  • Anno
  • 1926
  • Categoria
  • Amplificatore audio o mixer audio
  • Radiomuseum.org ID
  • 184336

 Specifiche tecniche

  • Principio generale
  • Amplificatore audio
  • Gamme d'onda
  • - senza
  • Tensioni di funzionamento
  • Batterie a secco
  • Altoparlante
  • - Questo apparecchio richiede altoparlante/i esterno/i.
  • Materiali
  • Bachelite
  • Radiomuseum.org
  • Modello: Microphone Bar Amplifier - New Wilson Electrical , London
  • Forma
  • Soprammobile con qualsiasi forma (non saputo).
  • Dimensioni (LxAxP)
  • 93 x 125 x 93 mm / 3.7 x 4.9 x 3.7 inch
  • Annotazioni
  • Magnetic microphone bar amplifier. Was used to amplify signals direct from a crystal set to a loudspeaker, using 1 or 2 dry batteries. Price 34/-

    The input signal is applied to two terminals and fed to the "receiving coils", which causes an iron reed to vibrate in sympathy to the changing magnetic field in the coils. The vibrations are then applied to a small carbon microphone, connected to a 3 volt battery. The amplified current is fed to the output terminals via a transformer to a loudspeaker or a set of headphones.

    This type of amplifier was invented in 1904 by Bell engineer H.E. Shreeve. Shreeve used the device to amplify telephone signals between New York and Chicago.

  • Fonte dei dati
  • - - Data from my own collection
  • Autore
  • Modello inviato da John Koster. Utilizzare "Proponi modifica" per inviare ulteriori dati.

 Collezioni | Musei | Letteratura

Collezioni

Il modello Microphone Bar Amplifier fa parte delle collezioni dei seguenti membri.

 Forum