• Year
  • 1965/1966
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 127181

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast, (BC) Long Wave (LW), 2 x SW and FM or UHF.
  • Power type and voltage
  • Line / Batteries (any type) / 230; 5 x 1,5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) - elliptical
  • Material
  • Leather / canvas / plastic - over other material
  • from Radiomuseum.org
  • Model: Globetraveler Junior F026 Ch= 865.602.63 - Nordmende, Norddeutsche Mende-
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 300 x 190 x 90 mm / 11.8 x 7.5 x 3.5 inch
  • Notes
  • UKW mit AFC.
  • Net weight (2.2 lb = 1 kg)
  • 3.1 kg / 6 lb 13.3 oz (6.828 lb)
  • Author
  • Model page created by Günter Goda. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Globetraveler Junior is part of the collections of the following members.

 Forum

Forum contributions about this model: Nordmende,: Globetraveler Junior F026 Ch= 865.602.63

Threads: 1 | Posts: 2

Hello:

I disassembled my Nordmende Globetraveler Junior earlier this afternoon and have some technical questions which I hope can be answered in the forum. This radio is the US version of the Nordmende Transita TS.

1. What lubricant should I use to lubricate the tuning condenser? It appears to turn freely and is not stuck. But I think that it would turn a little more easily if it were lubricated. Can I use ordinary contact cleaner or is there a better lubricant to use? I want something that sprays or brushes-on because I do not want to remove the condenser from the radio.

2. The AM dial cord spring is stretched out, probably due to a prevous repair. Where can I obtain a new replacement spring at reasonable cost? Is there a good online source?

If available, I would like to buy an assortment of many small springs (of various different sizes and tensions) so that I would always have them ready for use. Is there an online source that sells this?

3. The plastic dial bezel is intact but has numerous cracks and is starting to become brittle. What glue should I use to prevent the cracked areas from breaking off? Also, what cleaner or polish can I use to clean the plastic bezel after I have glued it?

I live in the United States but can usually purchase most parts online from sellers that sell worldwide.

Many thanks,

Mike Witas

Milwaukee, Wisconsin, USA

Attachments

Michael Witas, 21.Oct.12

Weitere Posts (2) zu diesem Thema.