Transita Automatic S 49m S33 Ch= 6/603 KL49m (866.603.30)
Nordmende, Norddeutsche Mende-Rundfunk GmbH (Sterling), Bremen-Hemelingen
- Pays
- Allemagne
- Fabricant / Marque
- Nordmende, Norddeutsche Mende-Rundfunk GmbH (Sterling), Bremen-Hemelingen
- Année
- 1965/1966
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 7684
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de transistors
- 10
- Principe général
- Super hétérodyne (en général); FI/IF 460/10700 kHz
- Circuits accordés
- 7 Circuits MA (AM) 13 Circuits MF (FM)
- Gammes d'ondes
- PO, GO, OC et FM
- Tension / type courant
- Piles sèches / 5 × 1,5 Volt
- Haut-parleur
- HP dynamique à aimant permanent + bobine mobile / Ø 13 cm = 5.1 inch
- Puissance de sortie
- 2 W (qualité inconnue)
- Matière
- Cuir / canvas / plastique mais autre matériel en dessous!
- De Radiomuseum.org
- Modèle: Transita Automatic S 49m S33 Ch= 6/603 KL49m - Nordmende, Norddeutsche Mende-
- Forme
- Portative > 20 cm (sans nécessité secteur)
- Dimensions (LHP)
- 273 x 184 x 94 mm / 10.7 x 7.2 x 3.7 inch
- Remarques
-
UKW: 87 - 104 MHz
KW: 5950 - 6200 kHz
MW: 515 - 1650 kHz
LW: 145 - 260 kHz
Betrieb im Auto über Autohalterung aus 6-V- oder 12-V-Autobatterie möglich. Netzbetrieb mit zusätzlichem Netzteil möglich.4 Ausführungen: kaviar, tabak, bordeauxrot, Teak.
- Poids net
- 2.8 kg / 6 lb 2.7 oz (6.167 lb)
- Source
- Handbuch VDRG 1966/1967 / Radiokatalog Band 1, Ernst Erb
- Schémathèque (1)
- -- Original-techn. papers.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 1757 modèles d'appareils, 1646 avec des images et 1275 avec des schémas.
Tous les appareils de Nordmende, Norddeutsche Mende-Rundfunk GmbH (Sterling), Bremen-Hemelingen
Collections
Le modèle Transita Automatic S 49m fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: Nordmende,: Transita Automatic S 49m S33 Ch= 6/603 KL49m
Discussions: 1 | Publications: 2
I have a Transita Automatic S 49m S33 with the teak housing.
Does anyone know what the difference is between the Transita Automatic and the Transita Automatic S ?
Visibly, there is an indication located at the left of the volume knob, which can be pulled upwards slightly. The indication is showing two small squares: a full white one and a diagonally divided white/black one.
Technically, I noticed some differences on the audio PCB: different values for some resistors, and a different current runaway protection circuit around trimmer R173 (featuring a thermistor and a diode).
In addition, the driver transistors Tr7 and Tr8 for the audio end transistors are no AC162 types, as indicated on the schematic, but AC151. They look original.
Can anyone tell me where the 'S' is standing for ?
Paulus van Os, 29.Jan.24