Industrial Power Analyser

Paton Electrical Pty. Ltd.(Palec); Sydney NSW

Daten
Forum
Bilder
Sammlungen

  • Jahr
  • 1970 ??
  • Kategorie
  • Service- oder Labor-Ausrüstung
  • Radiomuseum.org ID
  • 316453

 Technische Daten

  • Betriebsart / Volt
  • Keine Stromversorgung
  • Material
  • Metallausführung
  • von Radiomuseum.org
  • Modell: Industrial Power Analyser - Paton Electrical Pty. Ltd.
  • Form
  • Schweres Gerät für Militär oder Industrie (Boatanchor > 20 kg).
  • Bemerkung

  • Alternating Current Instrument, capable of comprehensive testing and power analysis of 3 Phase, 3 Wire and Single-Phase Circuits.

    AC operation only, must not be connected to DC current.

    MEASUREMENTS:

    Three Phase:

     Volts. Amperes, Watts, Phase Angle & Phase Sequence.

    Single Phase:

     Volts, Amperes & Watts (Power Factor by Calculation).

     

    RANGES:

    Voltmeter:

    Ranges 01150,300, 600 Volts A.C

    Ammeter:

    Ranges 0/5.25. 125 Amperes A.C.

    Power Factor:   

    Zero to Unity Power Factor (cos Ø).

    Meter:      

    Lead and Lag in 4 Quadrants. 0/360 Electrical Degrees of Lag of Current behind Voltage

    Wattmeter:

    2 Element Electro-Dynamic 0/1 KW. to, 0/100 KW 3 Phase 3 Wire Balanced and Unbalanced Load (0/0.5 KW. to 0/50 Single Phase). in 18 Ranges according to voltage and Current Ratings.

    Phase Sequence Indicator

     Moving Coil Rectifier Type, Horizontal Edgewise.

     

     

    When line current exceeds 125A or Phase to Phase Voltages exceeds 600 Volts the use of external current and/or potential transformers are necessary.

  • Literaturnachweis
  • - - Manufacturers Literature
  • Autor
  • Modellseite von Gary Cowans angelegt. Siehe bei "Änderungsvorschlag" für weitere Mitarbeit.

 Sammlungen | Museen | Literatur

 Forum