Industrial Power Analyser
Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Paese
- Australia
- Produttore / Marca
- Paton Electrical Pty. Ltd.(Palec); Sydney NSW
- Anno
- 1970 ??
- Categoria
- Strumento da laboratorio
- Radiomuseum.org ID
- 316453
- Tensioni di funzionamento
- Alimentazione non richiesta
- Materiali
- Mobile di metallo
- Radiomuseum.org
- Modello: Industrial Power Analyser - Paton Electrical Pty. Ltd.
- Forma
- Boatanchor (pesante apparecchio militare o commerciale, > 20 kg)
- Annotazioni
-
Alternating Current Instrument, capable of comprehensive testing and power analysis of 3 Phase, 3 Wire and Single-Phase Circuits.
AC operation only, must not be connected to DC current.
MEASUREMENTS:
Three Phase:
Volts. Amperes, Watts, Phase Angle & Phase Sequence.
Single Phase:
Volts, Amperes & Watts (Power Factor by Calculation).
RANGES:
Voltmeter:
Ranges 01150,300, 600 Volts A.C
Ammeter:
Ranges 0/5.25. 125 Amperes A.C.
Power Factor:
Zero to Unity Power Factor (cos Ø).
Meter:
Lead and Lag in 4 Quadrants. 0/360 Electrical Degrees of Lag of Current behind Voltage
Wattmeter:
2 Element Electro-Dynamic 0/1 KW. to, 0/100 KW 3 Phase 3 Wire Balanced and Unbalanced Load (0/0.5 KW. to 0/50 Single Phase). in 18 Ranges according to voltage and Current Ratings.
Phase Sequence Indicator
Moving Coil Rectifier Type, Horizontal Edgewise.
When line current exceeds 125A or Phase to Phase Voltages exceeds 600 Volts the use of external current and/or potential transformers are necessary.
- Bibliografia
- - - Manufacturers Literature
- Autore
- Modello inviato da Gary Cowans. Utilizzare "Proponi modifica" per inviare ulteriori dati.
- Altri modelli
-
In questo link sono elencati 49 modelli, di cui 38 con immagini e 3 con schemi.
Elenco delle radio e altri apparecchi della Paton Electrical Pty. Ltd.(Palec); Sydney NSW