• País
• Estados Unidos

• Fabricante / Marca
• Philco, Philadelphia Stg. Batt. Co.; USA

• Año
• 1934/1935

• Categoría
• Radio - o Sintonizador pasado WW2

• Radiomuseum.org ID
• 139504

Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.

• Numero de valvulas
• 5

• Válvulas
• 1A6 32 32 30 19

• Principio principal
• Superheterodino en general; ZF/IF 460 kHz

• Gama de ondas
• OM y banda pesquera (USA = tropical/marina/policia) = 150-200m

• Tensión de funcionamiento
• Baterías recargables o pilas / 135, 67.5, 2, -3, & -7 Volt

• Altavoz
• Altavoz dinámico (de imán permanente)

• Material
• Madera

• de Radiomuseum.org
• Modelo: 38L [Late] - Philco, Philadelphia Stg. Batt

• Forma
• Consola baja, patas más cortas del 50%.

• Anotaciones
• The model 38 series are battery operated 2-band sets with a variety of cabinet styles over several years.
  
  There were five versions of the cathedral 38B: Version 1 (1933) has the classic spade-shaped speaker opening used on many Philco cathedral cabinets. Version 2 (1934) has an oval opening with three vertical bars and downward curving additional bars at the bottom. Version 3 (1934-35) has an oval opening with stepped features at the bottom. Version 4 (1935) is similar to version 3, but has a larger escutcheon opening and new dial design. Version 5 (1936) has a cabinet with a continuous arch shape starting from the base and multiple vertical bars in the speaker opening.
  
  The model 38L lowboy has two versions: an early version (1933-34) with four narrow vertical bars at the edges of the speaker opening, along with other embellishment, and a late version (1934-35) with a single vertical bar through the center of the speaker opening, along with other embellishment.
  
  There was also a highboy (1933) and a floor-type console (1935-36).
  
  The chassis had an early version (used for 1933 and early 1934) with a type 15 mixer tube and a later version with type 1A6 mixer (used from mid 1934 onward). Chassis marked as model 38 have no ballast tube and are designed for use with a 2 volt storage battery for filaments. Those marked 38A have a ballast tube (type 6 early; type 1A1 late) and are designed for a dry battery (presumably 3 volts?) for the filament supply.
  
  Two Philco schematics are available: code 121 with type 15 mixer (also found in Rider vol 4) and code 123 with 1A6 mixer.

• Precio durante el primer año
• 60.00 $

• Procedencia de los datos
• Philco Radio 1928-1942

• Referencia esquema
• Rider's Perpetual, Volume 4 = ca. 1934 and before

• Documentación / Esquemas (1)
• Philco 1928-36 Wiring Diagrams, Parts Lists, and Essential Service Data

• Documentación / Esquemas (2)
• Pre-War Consoles

• Autor
• Modelo creado por Thomas Albrecht. Ver en "Modificar Ficha" los participantes posteriores.

• Otros modelos

• Donde encontrará 4017 modelos, 2213 con imágenes y 3667 con esquemas.
  Ir al listado general de Philco, Philadelphia Stg. Batt. Co.; USA