- País
- Holanda
- Fabricante / Marca
- Philips; Eindhoven (tubes international!); Miniwatt
- Año
- 1959/1960
- Categoría
- Radio - o Sintonizador pasado WW2
- Radiomuseum.org ID
- 29681
Haga clic en la miniatura esquemática para solicitarlo como documento gratuito.
- Numero de valvulas
- 5
- Principio principal
- Superheterodino en general; ZF/IF 452 kHz; 2 Etapas de AF
- Número de circuitos sintonía
- 6 Circuíto(s) AM
- Gama de ondas
- OM y dos OC
- Tensión de funcionamiento
- Red: Aparato AC/DC. / 110-127; 220 Volt
- Altavoz
- Altavoz dinámico (de imán permanente) / Ø 12 cm = 4.7 inch
- Material
- Bakelita
- de Radiomuseum.org
- Modelo: B3X95U /00K - Philips; Eindhoven tubes
- Forma
- Sobremesa de botonera.
- Ancho, altura, profundidad
- 328 x 183 x 155 mm / 12.9 x 7.2 x 6.1 inch
- Anotaciones
-
Variant /00K = cream color. Dial lamp: 8009D (6,3 V / 0,25 A).
- Peso neto
- 2.9 kg / 6 lb 6.2 oz (6.388 lb)
- Ext. procedencia de los datos
- Erb
- Otros modelos
-
Donde encontrará 5271 modelos, 4415 con imágenes y 3456 con esquemas.
Ir al listado general de Philips; Eindhoven (tubes international!); Miniwatt
Colecciones
El modelo es parte de las colecciones de los siguientes miembros.
Contribuciones en el Foro acerca de este modelo: Philips; Eindhoven: B3X95U /00K
Hilos: 1 | Mensajes: 37
Dial lamp is not working on my recently recapped and working Philips B3X95U radio. The light was out prior to the recap, so I was expecting that I would need to replace it.
I found in the service manual that the lamp used is 8009 D-07. A cross reference I found online indicated this is a 6.3V .25A.
I have tried an E10 6V .2A LED and incandescent bulb both did not work. Measured the voltage at the lamp socket and it is reading 6V with no bulb and about 4V with the bulb in place.
I by passed the socket with jumpers to a known good socket / bulb and still does not work. I must be missing something?
If anyone can point me in a direction on what to check, I would appreciate any help you can provide.
Thanks
James Holava, 28.Dec.21